649871
37
Zoom out
Zoom in
Previous page
1/46
Next page
35
GB
4. Items supplied
1 soundbar
1 power unit11
1 remote control
1 CR2025 3 V battery (inserted)
1 stereo cinch cable12
2x4 screws29 (25 mm / 50 mm)
4 rawlplugs30
2 wall brackets13
1 drilling template
1 copy of the user instructions
Remove all packing material.
Check that the device is undamaged.
In the case of incomplete delivery, please contact the re-
sponsible service centre of the manufacturer (see “Warran-
ty of the HOYER Handel GmbH” on page 39).
Please observe the illustrations on the fold-out page.
5. Before using for the first
time
5.1 Remote control
Initial use
Remove the transport lock from the battery compart-
ment and remote control.
Changing the battery
DANGER OF EXPLOSION! If the battery is not
correctly replaced. Replace only with the same or
an equivalent type.
1. FIGURE A: open the battery compartment cover by
unlocking it and sliding it in the direction of the arrow.
2. Replace the old battery with a new one.
WARNING! Ensure the correct polarity of the bat-
tery. The plus sign on the battery must be visible.
3. Close the battery compartment again.
5.2 Setting up / Wall mounting
NOTE: if you connect the device to a television set, place
the device as centrally as possible below the set.
Setting up
1. Place the device on a level surface.
2. Connect the power unit11 to the device.
Wall mounting
WARNING! Risk of material damage!
~ Please ensure the following when mounting on a wall:
- The fixing material must be matched to the proper-
ties of the wall. If necessary, use fixing material other
than that supplied.
- Make sure that in the installation location there are
no pipes or cables in the wall (e.g. electricity, water,
gas).
- If necessary, have the wall mounting carried out by
an expert.
~ In connection with the wall mounting, use HDMI right
angle plugs so the plugs cannot be damaged by kinks.
1. FIGURE B: drill 2 holes per wall bracket 40 cm apart.
If necessary, use the enclosed drilling template.
2. For the enclosed rawlplugs, use a drill with a diameter
of 5 mm.
3. Insert the rawlplugs30 into the drill holes.
4. Fasten the wall brackets13 firmly to the wall using the
screws29.
5. Insert all of the cables used into the connections (see
“Overview - Connections” on page 36).
6. Connect the power unit11 to the device.
7. Hook the device into the wall brackets13. Both wall
brackets13 must engage safely into the holder on the
rear of the device.
BB58B6RXQGEDUB%ERRN6HLWH)UHLWDJ$SULO
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSB 36 B2 - IAN 274307 Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSB 36 B2 - IAN 274307 Soundbar in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info