649224
31
Zoom out
Zoom in
Previous page
1/38
Next page
29
GB
5. Before using for the first time
Remove all packing material.
Check that the device is undamaged.
5.1 Remote control
Initial use
Remove the transport lock from the battery compart-
ment and remote control.
Changing the battery
DANGER OF EXPLOSION! If the battery is not
correctly replaced. Replace only with the same or
an equivalent type.
1. FIGURE A: open the battery compartment lid by un-
locking it and sliding it in the direction of the arrow.
2. Replace the old battery with a new one.
WARNING! Ensure the correct polarity of the bat-
tery. The plus sign on the battery must be visible.
3. Close the battery compartment again.
5.2 Setting up / Wall mounting
NOTE: if you connect the device to a television set, place
the device as centrally as possible below the set.
Setting up
1. Place the device on a level surface.
2. Connect the power unit7 to the device.
Wall mounting
WARNING! Risk of material damage!
~ Please ensure the following when mounting on a wall:
- The fixing material must be matched to the proper-
ties of the wall. If necessary, use fixing material other
than that supplied.
- Make sure that in the installation location there are no
pipes or cables in the wall (e.g. electricity, water, gas).
- If necessary, have the wall mounting carried out by
an expert.
1. FIGURE B: drill 2 holes at the same height at a dis-
tance of 40 cm apart. Use the attached drilling tem-
plate30 where appropriate.
2. Insert the rawlplugs29 into the drill holes.
3. Tighten the screws28 in the rawlplugs29.
4. Insert all of the cables used into the connections (see
“Connections” on page 29).
NOTE: in the case of wall mounting, use a jack max. 3 cm
in length for the optical input OPTICAL IN11 (and if nec-
essary a TOSLINK angle adapter) to prevent the cable
from kinking and avoid possible damage.
5. Connect the power unit7 to the device.
6. Suspend the device on the screws28 with the wall
brackets on the back.
5.3 Connections
CAUTION: make sure that the soundbar and the devices
to be connected are switched off before you connect them.
Please also read the operating instructions for the devices
which you are connecting.
A subwoofer can be connected to the cinch socket of
the SUB OUT10 output. This is automatically con-
trolled by the device.
5.4 How to use
NOTE: the device remains in standby mode after being
switched off. As the device still uses some electricity in this
mode, unplug the power unit7 from the wall socket to dis-
connect the device from the mains.
Connect the power unit 7 with an easily accessible
wall socket. The red LED1 on the device lights up. The
device is now in standby mode.
Input Use
Remote
control
button
LED
colour
AUX IN9
Connection with ste-
reo cinch cable8,
e.g. television set,
CD player
AUX17 white
LINE IN6
Connection with
3.5 mm stereo jack
cable, e.g.
MP3
player, telephone
LINE IN26 green
OPTICAL
IN11
Connection with
TOSLINK cable,
e.g. television set,
DVD player
OPTICAL16 orange
Bluetooth
Radio connection,
e.g. smartphone
14
blue
BB58B%ERRN6HLWH)UHLWDJ-XQL
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSB 36 A1 - IAN 113896 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSB 36 A1 - IAN 113896 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info