614544

Silvercrest SON 90 A1 - IAN 64780 Manual

32
Zoom out
Zoom in
Previous page
1/38
Next page
- 30 -
Flatlock decorative seams
To produce flatlock seams, set up the thread tensions for a 3-thread overlock
stitch. Sew a seam and then pull the fabric apart to smooth the seam.
The flatlock seam can be used as a decorative assembly seam or as pure
ornamental stitching (Fig. 87, dark thread).
Tips:
• Pay attention to proper tension, so that the workpiece can be pulled
well apart after sewing.
• Use a decorative thread as the upper looper thread, since this is the
most important thread and will be clearly visible.
1. Remove the right or the left needle (Fig. 88).
2. Set up the recommended tension settings for a 3-thread overlock seam
(Fig. 89).
3. Then readjust the upper thread tensions (green or blue) so that they are
much looser.
4. Now also release the thread tension of the upper looper (red) somewhat.
5. Then adjust the thread tension of the lower looper (yellow) considerably
tighter.
Flatlock seam as assembly seam
• Place the two fabrics to be sewn inside out to each other, so as to create
a decorative seam on the front side.
• Sew the seam and while doing this cut away the excess fabric (Fig. 90).
Figure 91 shows you the stitch pattern for this stitch.
• The upper thread (needle thread) (green or blue) then has a V-shaped
pattern on the inside of the fabric.
• The lower looper thread runs as a straight line along the fabric edge.
• Pull the fabric apart on both sides of the seam, so that the stitches lie
flat.
needle thread
Top
Underside
upper looper thread
Fig. 87
Fig. 88
Fig. 89
Fig. 90
Fig. 91
lower looper
thread
IB_64780_SON 90 A1_LB6 08.03.2011 17:22 Uhr Seite 30
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SON 90 A1 - IAN 64780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SON 90 A1 - IAN 64780 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SON 90 A1 - IAN 64780

Silvercrest SON 90 A1 - IAN 64780 User Manual - German, Dutch, French, Italian - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info