614544
30
Zoom out
Zoom in
Previous page
1/38
Next page
- 28 -
Roll hemmings
With this machine you can sew four different roll hemming types. When
sewing roll hemmings, the fabric edge is folded over and provided with an
overlock seam. Lightweight fabrics such as batiste, chiffon, organza and
so on are best for these kinds of seams. Heavy fabrics or stiff materials are
not suitable for roll hemmings.
Remove the left needle.
Set the seam width switch d at "R" (Fig. 80).
Align the support plate of the seam width finger on the marking "R"
on the stitch plate by turning out the seam width adjustment knob f
(Fig. 81).
Place the dial for the stitch length 5 at "F - 2" (Fig. 82). With this a fine
seam is sewn.
For roll hemmings use a needle with specification Nr. 14.
Tips:
For a rolled hem many different combinations of yarn can be used. To
create a particularly beautiful rolled hem (3-thread rolled hem), use a
bushy yarn (bushy polyamid thread/woolly nylon) as the upper looper
yarn and normal yarn for the needle and lower looper. For a 2-thread
rolled hem use bushy yarn for the lower looper thread and normal yarn
for the needle thread.
At the start of sewing hold the empty thread chain firmly so that they
cannot roll into the seam.
Subject the material to slight tension in the sewing direction. This will
make the seam more delicate.
Before cutting the thread chain close to the textile, apply a small drop
of fabric glue to the seam and allow it to dry. Check for colourfastness
on the textile prior to this.
3-thread rolled hem
Figure 83 shows you the stitch pattern for this stitch.
Adjust the thread tension selectors t z u to the appropriate values
(see table) then sew a test seam on the material being used.
3-thread upper looper overcast rolled hem
Figure 84 shows you the stitch pattern for this stitch. Adjust the thread tension
selectors t z u to the appropriate values (see table) then sew a test
seam on the material being used.
Upper looper
thread
Tensioning the thread
blue green red yellow
Polyester
- 2.0 7.5 3.0
Bushy yarn
- 2.0 2.0 2.0
Upper looper
thread
Tensioning the thread
blue green red yellow
Polyester
- 2.0 5.5 7.0
Bushy yarn
- 2.0 0 2.5
Needle position
Seam width switch
R
Stitch length
F - 2
Upper looper element
not necessary
needle thread
lower looper thread
upper looper thread
Top
Underside
needle thread
lower looper thread
upper looper thread
Top
Underside
Fig. 81
Fig. 82
Fig. 83
Fig. 84
Fig. 80
Roll hem
IB_64780_SON 90 A1_LB6 08.03.2011 17:22 Uhr Seite 28
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SON 90 A1 - IAN 64780 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SON 90 A1 - IAN 64780 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SON 90 A1 - IAN 64780

Silvercrest SON 90 A1 - IAN 64780 User Manual - German, Dutch, French, Italian - 146 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info