614542

Silvercrest SNMD 33 A1 - IAN 114196 Manual

84
Zoom out
Zoom in
Previous page
1/94
Next page
84
GB / IE
Blind stitch foot
For hems, curtains, trousers, skirts, etc.
Blind stitch for elastic fabrics.
1. Fold the fabric as illustrated with the
left side uppermost.
2. Place the reversed fabric under the
presser foot. Turn the handwheel (21)
forwards by hand until the needle is
fully to the left. It should just pierce the
fold of the fabric. If it does not, adjust
the stitch width accordingly.
3/4.Adjust the guide (3) by turning the dial
(4) so that the guide just rests against
the fold.
Sew slowly and guide the fabric carefully
so that its position does not change in
relation to the guide.
Stitch Stitch width Stitch length
D1~23~4
Button sewing foot
Install the embroidery and darning plate
(o).
Position the work under the foot. Place
the button on the marked position, lower
the presser foot, adjust stitch width to "0"
and first sew a few securing stitches in
the left hole. Adjust the stitch width
(usually between 3 and 4). Sew some
check stitches with the handwheel (21)
until the needle goes cleanly into the right
hole of the button (vary the stitch width
depending on the button) and sew on the
button. Adjust the stitch width to "0" and
sew a few securing stitches.
If a shank is required, place a darning
needle on top of the button and sew. For
buttons with 4 holes, sew through the
front two holes first, push the work
forward and then sew through the back
two holes as described.
Stitch Stitch width Stitch length
B0~50
Sewing basics
1
4
3
2
… 84 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-snmd-33-a1---ian-114196

Reset search

  • Is it possible to get a duplicate copy of the instruction manual for this machine? Mine was accidentally thrown out. Is there an address or telephone number who I can contact
    Thank you Submitted on 28-1-2018 at 17:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SNMD 33 A1 - IAN 114196 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 114196 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info