Manual Silvercrest SNMD 33 A1 - IAN 114195 (page 78 of 94) (English, German, Dutch, French)

614543

Zoom out

Zoom in

1/94

GB / IE

Inserting the bobbin

Important:

Note :

Turn power switch (20) to off ("O").

When inserting or removing the bobbin (g),

the needle must be fully raised.

1. Open the hinged cover.

2. Pull the bobbin case tab (A) and

remove the bobbin case.

3. Hold the bobbin case with one hand.

4. Insert the bobbin (3) so that the thread

runs in a clockwise direction (arrow). (4)

5. Pull the thread into the slit and under

the tension spring.

6. Hold the bobbin case between the

index finger and thumb on the bobbin

case tab (A).

7. Insert it into the shuttle race.

The method of bringing up the lower

thread is explained on page 80.

Getting ready

Winding the bobbin

Place the felt cushion (h) on the left

thread spool pin (15). Place the spool of

thread (m) on the same thread spool pin

(15).

Guide the thread from the spool into the

thread guide (2), and up to the bobbin.

Pull the thread from the inside through a

hole of the empty bobbin (g). Place the

spool on the spool holder (14) and then

push to the right into the filling position.

Hold the end of the thread. Press the

pedal (r). Release the pedal (r) after a

few turns. Release the thread and cut as

close as possible to the spool. Press the

pedal (r) again.

Once the spool is full, it rotates more

slowly. Release the pedal (r). Replace the

bobbin (g) into sewing position and

remove it.

If the bobbin winder spindle (14) is in

the winding position, the sewing

process is automatically interrupted.

To sew, push the bobbin winder

spindle (14) to the left (sewing position).

Note:

HI I have Silvercrest 114195 this machine. How do I lower the feed dog or teeth? Or do I have to buy a plate cover so that I can do free hand embroidery sewing. Any reply is appreciated! Submitted on 3-11-2021 at 14:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 114195 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 114195 Manual

Product: