Manual Silvercrest SNMD 33 A1 - IAN 114195 (page 77 of 94) (English, German, Dutch, French)

614543

Zoom out

Zoom in

1/94

The thread spool pins (C, D) serve to

hold the thread spools in place while

thread is being fed to the sewing machine.

To use the spool pin, pull it upwards. To

store it, push it down.

If you are using thread which tends to

wraps itself around the spool pin, put

the thread on the thread spool pin (C)

and guide the upper thread (A) through

the eye (B) in the thread spool pin (D),

see Fig. The eye (B) should point in

the direction of the thread spool.

Note:

GB / IE

Attaching the presser foot holder

Important:

1. Install the presser foot holder

2. Inserting the presser foot

3. Removing the presser foot

4. Inserting the edge/ quilt guide (p)

Turn the main switch (20) to off ("O")

when carrying out all the operations!

Raise the presser bar (A) by lifting the

two-step presser foot lifter (18) Attach

the presser foot holder (B) as

illustrated.

Lower the presser foot bar (B) until the

groove (C) is directly above the pin (D).

Lower the presser foot bar (A) as far

as it will go. The presser foot (a) will

engage automatically.

Raise the presser foot.

Press the lever (E) gently towards the

front and the presser foot disengages.

As shown in the illustration carefully

insert the edge/ quilt guide (p) e.g. For

hems, pleats, etc.

Getting ready

Setting up the thread spool pins

HI I have Silvercrest 114195 this machine. How do I lower the feed dog or teeth? Or do I have to buy a plate cover so that I can do free hand embroidery sewing. Any reply is appreciated! Submitted on 3-11-2021 at 14:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 114195 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 114195 Manual

Product: