Manual Silvercrest SNM 33 B1 - IAN 96965 (page 84 of 94) (English, German, Dutch, French)

597361

Zoom out

Zoom in

1/94

GB / IE

For hems, curtains, trousers, skirts, etc.

Blind stitch for elastic fabrics.

1. Fold the fabric as illustrated with the left

side uppermost.

2. Place the reversed fabric under the

presser foot. Turn the handwheel (20)

forwards by hand until the needle is fully

to the left. It should just pierce the fold of

the fabric. If it does not, adjust the stitch

width accordingly.

3/4.Adjust the guide (3) by turning the dial

(4) so that the guide just rests against

the fold.

Sew slowly and guide the fabric carefully so

that its position does not change in relation

to the guide.

Stitch Stitch width Stitch length

D1~23~4

Stitch Stitch width Stitch length

B0~50

Sewing basics

Blind stitch foot

Button sewing foot

Install the embroidery and darning plate (o).

Position the work under the foot. Place the

button on the marked position, lower the

presser foot, adjust stitch width to "0" and

first sew a few securing stitches in the left

hole. Adjust the stitch width (usually

between 3 and 4). Sew some check

stitches with the handwheel (20) until the

needle goes cleanly into the right hole of

the button (vary the stitch width depending

on the button) and sew on the button.

Adjust the stitch width to "0" and sew a few

securing stitches.

If a shank is required, place a darning

needle on top of the button and sew. For

buttons with 4 holes, sew through the front

two holes first, push the work forward and

then sew through the back two holes as

described.

Totally lost as how to attach Two-step presser foot lifter. Do you have to attach that? Have everything else set up. HELP. It says in accessories that it is already installed. If so why is it telling me to install it? Submitted on 25-10-2020 at 19:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 - IAN 96965 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNM 33 B1 - IAN 96965 Manual

Product: