Manual Silvercrest SNM 33 B1 - IAN 96965 (page 85 of 94) (English, German, Dutch, French)

597361

Zoom out

Zoom in

1/94

GB / IE 85

Buttonhole foot

Preparation:

Note:

To prepare the fabric:

Tips:

Remove the presser foot and attach the buttonhole

foot (d). Adjust the stitch length dial (5) to between

"0.3" - "1". The density of the stitch depends on

thickness of the fabric.

Always test sew a buttonhole.

Measure the diameter of the button and add 0.3cm

(1/8") for the bartacks. If you have a very thick

button, add more to the diameter measurement.

Mark the position and length of the buttonhole on

the fabric. Raise the needle to its highest position.

Position the fabric so that the needle is on the mark

that is furthest from you.

Push the buttonhole foot (d) towards you as far as it

will go. Lower the foot.

A. Turn the stitch selector dial (6) to " ". Sew at

moderate speed until you reach the end mark.

Raise the needle to its highest position.

B. Turn the stitch selector dial (6) to " " and sew

5-6 bar tack stitches. Raise the needle to its

highest position.

C. Turn the stitch selector dial (6) to " " and sew

the left side of the buttonhole to the mark at the

end which is further from you. Raise the needle

to its highest position.

D. Turn the stitch selector dial (6) to " " and sew a

few bar tack stitches. Raise the needle to its

highest position.

Lift the foot. Remove the fabric from under the foot

and separate the threads. Draw the upper thread

through the fabric to the ear and knot the upper and

lower threads. Cut the centre of the buttonhole with

the stitch ripper (n), being careful not to cut the

stitches on either side.

- Slightly reduce upper thread tension (3) to

produce better results.

- It is recommended that you use a backing

material such as yarn or fleece for fine, stretchy

or knitted fabrics. The zigzag stitch must sew over

the yarn (E).

Stitch Stitch width Stitch length

50.3~1

Sewing basics

Stitch length

AB CD

0.3

Totally lost as how to attach Two-step presser foot lifter. Do you have to attach that? Have everything else set up. HELP. It says in accessories that it is already installed. If so why is it telling me to install it? Submitted on 25-10-2020 at 19:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 - IAN 96965 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNM 33 B1 - IAN 96965 Manual

Product: