679193

Silvercrest SKV 1200 B2 - IAN 292161 Manual

26
Zoom out
Zoom in
Previous page
1/117
Next page
■ 22│GB
│
IE
SKV 1200 B2
3) To use the lid 9, place it on the part of the
housing which surrounds the attachment tool
socket 7 in such a way that the filling opening
is facing you. On the attachment tool socket 7
there is a locking device for the lid 9:
AttENtION! PrOPErty dAmAgE!
► Never apply any pressure to the lid 9 when
attaching and removing it in order to ensure
that it is not damaged.
4) Depending on what you want to do, fit the
kneading hook 0, whisk q or beater w into
the attachment tool socket 7:
– Insert the kneading hook 0, whisk q or
beater w into the socket 7 so that the two
metal pins on the axle of the attachment 0
q w lock into the recesses of the attach-
ment tool socket 7.
– Press the attachment 0 q w as far as it
will go into the socket 7 and then turn it
anticlockwise as far as it will go (in the
direction of the arrow
).
– Let go of the attachment 0 q w. This is now
firmly held in the attachment tool socket 7.
5) Add the ingredients you wish to process into
the mixing bowl 6.
NOtE
► Please note that during the kneading or stirring
process, the dough in the mixing bowl 6
increases in volume or is pressed upward
slightly as a result of the movement. You
should therefore never fill the mixing bowl 6
right up to the top!
Warning! Danger of crushing! Make sure
that no parts of the body are located
under the swivel arm 1 when you push it
downwards.
6) Press down the release lever 2 and press the
swivel arm 1 with the attachment mounted
downwards into the working position until the
swivel arm 1 locks in place.
NOtE
► If you wish, you can open the filling opening
8 on the lid 9 so that you can also fill in
ingredients during operation.
7) Turn the rotary switch 3 to the required level
(see the section “Speed settings”).
After you have finished using your
appliance
1) Turn the appliance off using the rotary switch 3
(Position “0”).
2) Press down the release lever 2 and move the
swivel arm 1 to the highest position.
3) Remove the attachment 0 q w from the
socket 7 by pressing the attachment 0 q w
lightly against the socket 7 and turning it
clockwise at the same time (in the direction
of the arrow
). Then you can remove the
attachment 0 q w.
4) If fitted: remove the lid 9.
5) Remove the mixing bowl 6 by turning it anti-
clockwise and then pulling it upwards.
6) Clean the appliance (see section “Cleaning
and care”).
IB_292161_SKV1200B2_LB8.indb 22 22.09.17 07:53
… 26 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-skv-1200-b2---ian-292161

Reset search

  • Dobrý den, chcem dokupit prislušenstvo k kuchynskemu robotu IAN 292161 Jedná sa o mlyncek na mäso a dalšie mlyncek na rezance. Dakujem Peter Zelinka Slovakia. Submitted on 3-11-2020 at 22:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKV 1200 B2 - IAN 292161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKV 1200 B2 - IAN 292161 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info