Manual Silvercrest SKT 2300 (page 42 of 58) (English, Portuguese, Spanish)

519366

Zoom out

Zoom in

1/58

After a short time the temperature display

stops ﬂashing and switches to the measured

value.

Note: The temperature is measured at the

appliance. It might be some time before the

entire room has also reached this tempera-

ture.

As soon as the set temperature is reached,

the heating function switches off automati-

cally and the indicator lights 19 for the heat

settings ﬂash. As soon as the temperature

falls below the desired temperature, the hea-

ting function automatically switches on

again and the indicator lights 19 for the

heat settings are constantly illuminated.

5.3 Setting the heat setting

The appliance has three heat settings:

– 1,000 watts

– 1,300 watts

– 2,300 watts

1. Press button 17 repeatedly until the desi-

red heat setting is set.

The relevant indicator light 19 lights up.

Notes:

– if both indicator lights 19 are illumina-

ted, the 2,300 watts heat setting has

been selected,

– if no indicator light 19 is illuminated,

the heating function is switched off,

– if the indicator lights 19 ﬂash, the

desired temperature has been rea-

ched.

2. Press the fan button 16 to switch the fan

on or off.

When the fan is switched on, the indica-

tor light 14 lights up.

Note: The fan might make a slight noise,

but it does ensure better circulation of

the heated air.

5.4 Setting the heating time

The appliance has a timer for setting the

heating time to between 1 and 15 hours.

The appliance switches off automatically

once the heating time has expired.

1. Press the timer button 11 repeatedly until

the desired number of hours is indicated

by the indicator lights 10.

Note: You will need to add together the

number of hours indicated by the indica-

tor lights 10. If, for example, 2H and 8H

are lit up, the heating time is 10 hours.

2. To switch off the timer, press the timer

button 11 repeatedly until none of the

indicator lights 10 is illuminated.

5.5 Thermal cut-out

For your safety the appliance has a thermal

cut-out.

If the temperature inside the appliance beco-

mes too high, the appliance switches off

automatically:

1. Switch the mains switch 8 to 0FF to

switch off the appliance.

2. Check whether the air inlet 6 or outlet 4

is obstructed and remove the cause.

If you cannot establish a cause and the

fault occurs repeatedly, have the

appliance repaired or else take it out of

use.

3. Wait for the appliance to cool down.

4. You can then continue to operate it nor-

mally.

RP66642 Konvektor LB5 Seite 40 Donnerstag, 19. Mai 2011 10:54 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKT 2300 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKT 2300

Silvercrest SKT 2300 User Manual - German, Dutch, French, Italian - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKT 2300 Manual

Product: