519366
41
Zoom out
Zoom in
Previous page
1/58
Next page
SKT 2300 A1 39
2. Plug the mains plug into a wall socket
that complies with the technical data.
Note:If you have plugged other power
consumers into the same circuit, check
that the maximum load for the installed
fuse is not exceeded, as otherwise the
fuse will trip.
4.3 Inserting the batteries
If the appliance is new or the batteries in the
remote control are flat, new type AAA/R03
batteries must be inserted.
1. Press the catch
and lift the lid off
the battery com-
partment.
2. Remove the old batteries if present.
Note: Please observe the instructions for
disposal (see “8.2 Disposable/recharge-
able batteries” on page 42).
3. Insert new batteries.
Note: Ensure the correct polarity (+/–).
The correct polarity is shown on the bot-
tom of the battery compartment.
4. Close the battery compartment again.
5. Operating
5.1 Using the appliance for the first
time
1. Plug the mains plug into a wall socket
that complies with the technical data (see
“9. Technical data” on page 43).
2. Switch the mains switch 8 to ON to
switch on the power supply.
The lamp in the main switch 8 lights up
and you hear a beep.
3. Press the On/Off button 18 to switch the
appliance on.
The display 9 lights up.
The appliance is now ready for use and can
be operated by means of the remote control
or control panel 2. To operate the appliance
by means of the control panel 2, first raise
the cover 3.
5.2 Selecting the temperature
1. To choose whether you wish the tempe-
rature to be displayed in °C or °F, press
button 13.
The indicator light 12 shows which unit
of measurement is selected.
2. Press the “Increase temperature” button
21 to increase the desired temperature
up to a maximum of 35 °C (95 °F).
The selected desired temperature flashes
in the display 9.
3. Press the “Reduce temperature” button
20 to lower the desired temperature to a
minimum of 10 °C (50 °F).
The selected desired temperature flashes
in the display 9.
RP66642 Konvektor LB5 Seite 39 Donnerstag, 19. Mai 2011 10:54 10
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKT 2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKT 2300 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKT 2300

Silvercrest SKT 2300 User Manual - German, Dutch, French, Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info