Manual Silvercrest SKRP 1000 A1 IAN 49029 (page 45 of 62) (English, Portuguese, Spanish)

737611

Zoom out

Zoom in

1/62

- 43 -

Press the button MODE/LOCK k to save the

menu settings and to close it down.

Further setting possibilities

Setting the display brightness

Press the button LIGHT/DIMMER j repeat-

edly to set the brightness level at which the

display should be illuminated. The brightness

can be set at 3 levels.

Illuminated clamp strip

Documents, for example recipes, with a width

of up to 10 cm can be inserted and automati-

cally held in the clamp strip d. If you press

and hold the button LIGHT/DIMMER j for

two seconds, the downward facing lamp is

switched on, which then illuminates the recipe.

Press and hold the button j once again for

two seconds to switch the lamp o.

Kitchen timer

1. Press the button TIMER s.

2. Using the buttons UP/DOWN 1(/l,

set the desired time interval (a time span

between 1 minute and 23:59 h is pos-

sible). Pressing and holding one of the

buttons changes the display in ten-minute

intervals. Or press one of the buttons

M1–M4 t–i to recall a saved preset

time for the kitchen timer. The following

times are factory pre-programmed:

Button M1 t = 5 min. (Indicator = T1)

Button M2 y = 10 min. (Indicator = T2)

Button M3 u = 15 min. (Indicator = T3)

Button M4 i = 20 min. (Indicator = T4)

3. Press the button TIMER s once again to

start the kitchen timer. In the display r a

clock icon running in reverse and a cook-

ing pot symbol appears.

4. From 30 seconds before expiry of the time

span an acoustic signal sounds, repeating

at shorter intervals the closer the set time

approaches. When the time has expired,

the alarm sounds continuously and with

increasing volume.

5. Press any button to stop the alarm, even if

the button lock is switched on .

Interrupting the kitchen timer.

• To interrupt the kitchen timer, switch to the

kitchen timer mode by pressing the button

TIMER s.

• Then briey press the button TIMER s to

interrupt the kitchen timer.

The time is halted, the indicator blinks for

10 seconds. After this period the appliance

returns to automatic modus. To restart the

kitchen timer, briey press the button TIMER

s again to switch back into the kitchen timer

mode.

• Press the button TIMER s once again. The

time then continues to run.

• To completely switch the kitchen timer o,

press and hold the button TIMER s for 3

seconds The clock and cooking pot sym-

bol disappear.

Programming the kitchen timer

You can programme frequently used times for

the kitchen timer into the appliance, so that

you do not need to enter them in repeatedly.

As the appliance can be used by several

people, it has user switching, A/B. Both users

can save 4 dierent timer periods each.

First, select the desired user. To switch

between users, press and hold the button

USER/BAND h for two seconds.

Then press the button TIMER s.

Using the buttons UP/DOWN 1(/l

enter in the desired time.

Press the button MEM/AMS o. On the

right and next to the time indicator, "T"

lights up.

5. Press one of the pre-set buttons M1–M4

t–i, under which the kitchen timer pe-

riod should be saved. Its number is now

shown to the right of the "T".

Press the button MEM/AMS o once

again to conclude the saving.

Setting alarm times (Alarms 1 and 2)

You can programme two alarm times into

your kitchen radio.

L'allumage des diodes et de l'écran très peut visible Submitted on 21-5-2021 at 10:30
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKRP 1000 A1 IAN 49029 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKRP 1000 A1 IAN 49029

Silvercrest SKRP 1000 A1 IAN 49029 User Manual - German, Dutch, French, Italian - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKRP 1000 A1 IAN 49029 Manual

Product: