Manual Silvercrest SKMP 1300 B3 - IAN 277709 (page 11 of 85) (English, German, Dutch, Danish, French)

646946

Zoom out

Zoom in

1/85

│

7 ■

SKMP 1300 B3

Working with the kneading

hook, beater and whisk

WARNING! RISK OF INJURY!

► Under no circumstances should you place

your hands or ﬁ ngers in the mixing bowl 6

during operation! Danger of injury due to

rotating parts!

► Switch from one accessory to another only

when the drive unit is at a complete standstill!

After being switched oﬀ , the drive continues

to run for a short time.

► In cases of malfunction, switch the appliance

oﬀ and remove the plug from the wall socket.

This will prevent the appliance from becoming

switched on again unintentionally.

CAUTION – PROPERTY DAMAGE!

►

When working with kneading hooks 0,

whisk q or beater w, we recommend

allowing the appliance to cool down after

10 minutes of operation.

NOTE

►

When you are working with the kneading

hook 0, whisk q or beater w, the drive unit

lid u must be in place. If not, the appliance

will not start.

To prepare the device for tasks involving the knead-

ing hooks 0, whisk q or beater w, proceed as

follows:

1) Push the release lever 2 upwards and move

the swivelling arm 1 to the highest position.

2) Insert the mixing bowl 6 so that the locking

mechanisms on the mixing bowl 6 ﬁ t into the

recess in the base 5. Rotate the mixing bowl 6

clockwise (cf. symbols

and

on the

base 5) until it is locked and stable.

3) Depending on type of application, mount either

the kneading hook 0, whisk q or beater w

onto the drive shaft 7:

– Place the kneading hook 0, whisk q or

beater w onto the drive shaft 7 so that

both metal pins on the drive shaft 7 ﬁ t into

the recesses in the inset 0 q w.

– Push the inset 0 q w ﬁ rmly onto the drive

shaft 7 until the spring is compressed while

rotating the inset a little anticlockwise (direc-

tion

– Let go of the inset. It is now ﬁ rmly attached

to the drive shaft 7.

4) Add the ingredients you wish to process to the

mixing bowl 6.

NOTE

►

Please note that the dough in the mixing bowl

6 will increase in volume or will be pressed

upwards by the movement during the kneading

or mixing process. Therefore, never ﬁ ll the

mixing bowl 6 to the brim!

5) Push the release lever 2 upwards and push

the swivelling arm 1 into its working position

with the mounted inset facing downwards.

6) Push the lid 9 onto the mixing bowl 6.

IB_276995_96_277709_SKMP1300B3_DK_BE_NL.indb 7 22.03.16 15:21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMP 1300 B3 - IAN 277709 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKMP 1300 B3 - IAN 277709 Manual

Product: