612473

Silvercrest SKMP 1300 B3 - IAN 113374 Manual

12
Zoom out
Zoom in
Previous page
1/101
Next page
8
SKMP 1300 B3
GB
IE
NOTE
► If desired, you can mount the filling nose
onto the lid :
– Rotate the lid a little until the opening
is pointing at you.
– Hook the filling nose into the eyelets
in the lid :
You can now add ingredients, even while the
device is in operation.
7) Turn the rotary switch to the required setting
(cf. section “Speed Levels”).
After you have finished using your
appliance
1) Switch the appliance off using the rotary
switch .
2) If mounted, remove the filling nose .
3) Remove the lid from the mixing bowl .
4) Push the release lever upwards and move
the swivelling arm to the highest position.
5) Remove the inset -3 from the drive shaft
by pushing the inset -3 against the
drive shaft and simultaneously rotating
it clockwise (direction
). Now you can
remove the inset.
6) Remove the mixing bowl by rotating it
anticlockwise and lifting it off the base.
7) Clean all parts of the appliance (see section
“Cleaning and care”).
Working with the blender
WARNING! RISK OF INJURY!
► Allow hot fluids to cool to a lukewarm temper-
ature (approx. 30–40°C) before pouring
them into the blender 0.
WARNING! RISK OF INJURY FROM
SHARP BLADE/ROTATING DRIVE!
► Never put your hand into the blender 0
while it is attached!
► Only remove the blender 0 when the blade 6
is at a complete standstill.
► Only use the blender 0 with the lid . with
measuring cup !firmly in position.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
CAUTION! PROPERTY DAMAGE!
► Never use the mixing bowl and the blender
0 simultaneously! This will overload the
drive!
► When working with the blender 0, we
recommend allowing the appliance to cool
down after 3 minutes of operation.
Proceed as follows to prepare the appliance for
operation using the blender 0: Refer to figure C
on the back flap.
1) Push the release lever upwards and push
the swivelling arm down into its working
position.
IB_113373_74_SKMP1300B3_SE_DK_BE_NL.indb 8 29.06.15 15:03
DIN A5 148 mm x 210 mm
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-skmp-1300-b3---ian-113374

Reset search

  • Hello
    We need to replace the blender as it's cracked while blending
    The IAN is113374

    Thank you Submitted on 9-5-2020 at 20:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKMP 1300 B3 - IAN 113374 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMP 1300 B3 - IAN 113374 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKMP 1300 B3 - IAN 113374

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - English - 2 pages

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - German - 2 pages

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - Dutch - 2 pages

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info