612473

Silvercrest SKMP 1300 B3 - IAN 113374 Manual

11
Zoom out
Zoom in
Previous page
1/101
Next page
7
SKMP 1300 B3
GB
IE
Working with the kneading
hook, beater and whisk
WARNING! RISK OF INJURY!
► Under no circumstances should you place
your hands or fingers in the mixing bowl
during operation! Danger of injury due to
rotating parts!
► Switch from one accessory to another only
when the drive unit is at a complete standstill!
After being switched off, the drive continues
to run for a short time.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
CAUTION – PROPERTY DAMAGE!
► When working with kneading hooks ,
whisk - or beater 3, we recommend
allowing the appliance to cool down after
10 minutes of operation.
NOTE
► When you are working with the kneading
hook , whisk - or beater 3, the drive unit
lid 1 must be in place. If not, the appliance
will not start.
To prepare the device for tasks involving the knead-
ing hooks , whisk - or beater 3, proceed as
follows:
1) Push the release lever upwards and move
the swivelling arm to the highest position.
2) Insert the mixing bowl so that the locking
mechanisms on the mixing bowl fit into the
recess in the base . Rotate the mixing bowl
clockwise (cf. symbols
and
on the
base ) until it is locked and stable.
3) Depending on type of application, mount either
the kneading hook , whisk - or beater 3
onto the drive shaft :
– Place the kneading hook , whisk - or
beater 3onto the drive shaft so that
both metal pins on the drive shaft fit into
the recesses in the inset -3.
– Push the inset -3 firmly onto the drive
shaft until the spring is compressed while
rotating the inset a little anticlockwise (direc-
tion
).
– Let go of the inset. It is now firmly attached
to the drive shaft .
4) Add the ingredients you wish to process to the
mixing bowl .
NOTE
► Please note that the dough in the mixing bowl
will increase in volume or will be pressed
upwards by the movement during the kneading
or mixing process. Therefore, never fill the
mixing bowl to the brim!
5) Push the release lever upwards and push
the swivelling arm into its working position
with the mounted inset facing downwards.
6) Push the lid onto the mixing bowl .
IB_113373_74_SKMP1300B3_SE_DK_BE_NL.indb 7 29.06.15 15:03
DIN A5 148 mm x 210 mm
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-skmp-1300-b3---ian-113374

Reset search

  • Hello
    We need to replace the blender as it's cracked while blending
    The IAN is113374

    Thank you Submitted on 9-5-2020 at 20:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKMP 1300 B3 - IAN 113374 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMP 1300 B3 - IAN 113374 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKMP 1300 B3 - IAN 113374

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - English - 2 pages

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - German - 2 pages

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - Dutch - 2 pages

Silvercrest SKMP 1300 B3 - IAN 113374 Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info