575490
61
Zoom out
Zoom in
Previous page
1/74
Next page
SKMP 1200 A2 59
4.6 For the safety of your child
Warning! Children are often
unaware of danger and are injured
as a result. Please note therefore:
Ensure that the packing foil does not
become a deadly trap for a child.
Packing foils are not toys.
4.7 Material damage
Warning! Follow the instructions given
below to prevent material damage.
Only place the appliance on a level,
dry, non-slip surface to stop the appli-
ance falling over or sliding off.
Do not place the appliance on top of a
hot stove.
Do not use the blender jug 12 and the
mixing bowl 16 at the same time. This
might overload the appliance.
Never use the mixer and the blender
jug 12 when empty. This might cause
the motor to overheat.
The mixer should only ever be operated
for max. 10 minutes at a time, and the
blender for 3 minutes. Afterwards the
appliance must be first allowed to cool
down to roomtemperature again.
Only ever use the blender jug 12 with
the lid in place 11 as liquid might other-
wise be ejected.
Do not move the appliance if food or
pastry is still inside.
Only use the blender jug 12 to mix
drinks or make dressings.
Do not overfill the mixing bowl 16 or
blender jug 12 as the contents might
otherwise be ejected.
Never add hot or boiling food to the
blender jug 12.
5. Unpacking and setting up
1. Remove the individual parts from the
packaging.
2. Check that the individual parts are
complete (see “1.2 Scope of supply” on
page 55) and are undamaged.
3. Clean the appliance thoroughly before
using it for the first time (see
“8. Cleaning the appliance” on
page 68).
4. Place the appliance on a level, dry, non-
slip surface so that the appliance can
neither fall over nor slide off.
5. Check that the speed controller 4 is set
to "0".
6. Put the plug in a suitable socket (see
“3. Technical data” on page 56).
The appliance is now ready to use.
6. Operating the appliance
6.1 Assembling the appliance
1. Press the unlock lever 6 and swing up
the drive arm 1.
Note: Press the unlock lever 6 round
fully and hold until the drive arm 1 is
right down. Then swing the unlock
lever 6 back again.
RP100104-105590 Küchenmaschine LB2 Seite 59 Donnerstag, 12. Juni 2014 12:25 12
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKMP 1200 A2 - IAN 105590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMP 1200 A2 - IAN 105590 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKMP 1200 A2 - IAN 105590

Silvercrest SKMP 1200 A2 - IAN 105590 User Manual - Italian, Portuguese, Spanish - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info