575490
60
Zoom out
Zoom in
Previous page
1/74
Next page
58
swimming pool, as water may splash
into the appliance.
If liquid should enter the appliance,
unplug the mains plug immediately and
have the appliance repaired by a
qualified technician. The contact data
can be found in “Service Centre” on
page 70.
Never touch the appliance, the mains
cable or the mains plug with wet hands.
Always unplug it by pulling out the plug,
never pull on the cable itself.
Ensure that the mains cable is not kinked,
twisted or crushed.
Keep the mains cable away from hot
surfaces, such as the top of a stove.
If you are not going to use the appliance
for a while, remove the plug from the
wall socket. Only then is the appliance
completely free of current.
Avoid using extension cables. These
may only be used under very specific
conditions:
the extension cable must be able to
handle the amount of current drawn
by the appliance,
the extension cable must not be
"suspended". Keep children away
from it and ensure that it does not
present a trip hazard,
under no circumstances use a
damaged extension cable,
do not connect any other appliances
to the mains socket, since it could
cause an overload (do not use
multiple sockets of any kind).
4.5 Preventing injury
Warning! To avoid injury, please
observe the following information.
Make sure that the mains cable never
becomes a trip hazard, that no-one can
get tangled in it or tread on it.
During operation, avoid contact with the
moving parts of the appliance such as
the blades of the blender jug 12, the
dough hook 13, balloon whisk 14 or
beater 15. Your hands or hair could be
drawn into the appliance, leading to
injuries. Only ever switch the appliance
on if you have correctly fitted the splash
guard 8 when using the mixing bowl 16
or the lid 11 when using the blender
jug 12.
Always remove the power supply plug
from the mains socket before cleaning
the appliance or changing the attach-
ments.
Remember that the blades of the blender
jug 12 are extremely sharp. Never
touch the blades with bare fingers to
avoid cutting yourself.
Always first switch off the appliance
using the speed controller 4 before
removing the power supply plug. Other-
wise the appliance might start up when
you insert the power supply plug in a
mains socket again.
If you are not using the blender jug 12,
the cover 2 must be fitted. Otherwise the
appliance will not work so as to protect
the user from injury.
RP100104-105590 Küchenmaschine LB2 Seite 58 Donnerstag, 12. Juni 2014 12:25 12
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKMP 1200 A2 - IAN 105590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMP 1200 A2 - IAN 105590 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKMP 1200 A2 - IAN 105590

Silvercrest SKMP 1200 A2 - IAN 105590 User Manual - Italian, Portuguese, Spanish - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info