600790
51
Zoom out
Zoom in
Previous page
1/62
Next page
49
GB
6. Installation
DANGER! Risk of injury from
cutting!
~ The blade insert8, the grating disk5
and slicing insert4 are sharp. Handle
with care.
~ Only plug the mains plug14 into the
wall socket after the food processor has
been completely assembled.
NOTE: the device is equipped with a safe-
ty switch. The bowl11 can only be
locked with a closed lid3 and can only be
put into operation once it's locked.
1.
Figure A:
place the bowl
11
on the mo-
tor block
15
. The symbol
16
points to
the bottom marking on the bowl
12
. Do
not
turn the bowl.
2. Place the drive axle9 in the bowl.
3. Figure E: if required, place the slicing
insert4 / grating disk5 into the insert
holder6.
4. Place the dough blade7, the blade in-
sert8 or the insert holder6 with at-
tached slicing insert4 / grating disk5
on the drive axle9.
5. Dough blade7 / Blade insert8: Fill the
prepared foodstuffs into the bowl11,
as desired.
6. Figure A+B: place the lid3 on the
bowl11. The symbol 2 points to the
top marking on the bowl10.
7. Figure B+C: turn the lid3 in a clock-
wise direction as far as it will go, until
the symbol 2 points to the top mark-
ing on the bowl10.
8. Figures C+D: turn the bowl11 in a
clockwise direction as far as it will go,
until the symbol 16 points to the bot-
tom marking on the bowl12.
9. Insert the mains plug
14
into a wall sock-
et corresponding to the technical data.
7. Operation
DANGER! Risk of injury from
cutting!
~ T
he insert holder
6
, the blade insert
8
and the
dough blade
7
keep on turning
after the device has been turned off.
Please wait until all parts have come to
a standstill before unlocking the
bowl11 and opening the lid3.
~ The device must never be operated with-
out the bowl11.
WARNING! In order to prevent damage to
the device, interrupt the blending process im-
mediately if the insert holder6, the blade in-
sert8 and the dough blade7 are not turning
or are turning with difficulty. If this happens,
pull out the mains plug14 and check wheth-
er there is something in the bowl11 blocking
movement or whether the food is too tough.
Also check whether the device is assembled
correctly.
CAUTION: depending on the hardness and
consistency of the foodstuffs, do not fill the
bowl11 to the maximum, as the insert hold-
er6, the blade insert8 and the dough
blade7 could get blocked. Pay attention
here to the guideline values for various foods
in the "Processing table" section.
NOTE: for chopping harder foodstuffs, use
the setting P. Work with short pulses (1 pulse:
turn on P for approx. 1 second).
The number
and length of the pulses will depend on the
quantity and consistency of the food
.
__RP104067_B2.book Seite 49 Montag, 3. November 2014 11:26 11
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 350 A1 - IAN 104067 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 350 A1 - IAN 104067 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info