793239
11
Zoom out
Zoom in
Previous page
1/129
Next page
GB/IE/NI/CY/MT 11
The indicator light
6
of the respective toggle
switch 4
  resp.
5
used will turn on during oper-
ation.
The indicator lights 6 only go out when the
temperature control 7 is in the "MIN" position.
4.2 Setting the temperature controller
Start the unit by setting the desired heat level
using the toggle switches
4
  and
5
  
.
Turn the temperature control knob
7
clockwise
as far as it will go.
7
When the desired temperature has been
reached, turn the temperature control knob 7
back counterclockwise until you hear a clear
click. The indicator light(s) 6  will go out.
An integrated mechanical thermostat now auto-
matically switches the heating function and the
indicator lamp/s on/off.
4.3 Switch off device
Set both toggle switches
4
  and
5
to the "OFF"
position.
The indicator lights
6
on the toggle
switches
4
  and
5
will turn off.
Set the temperature controller's
7
stepless rotary
switch to the “MIN” position.
Pull the power plug out of the socket.
Wait until the unit has cooled down before
covering it or storing it.
4.4 Overheat protection
This device is equipped with an overheating pro-
tection If the device is too hot, the heating element
switches off automatically.
Switch off the unit by setting the toggle switches
4
  and
5
to the “OFF” position and the rotary
switch
7
to the “MIN” position.
Pull the power plug out of the socket.
Wait until the device has cooled down - at least
10 minutes.
Check the air inlet and air outlet holes. Eliminate
the cause of the overheating before you restart
the device.
CAUTION! Usually the device never gets
overheated without cause! If it gets too
hot, there is a danger of fire!
Check whether the device is able to give off the
heat properly: Is the device covered with anyt-
hing? Or, perhaps, it is too close to a wall or
other obstacle? Check whether the grids on the
front or rear side are free of dirt and not cove-
red. Is the fan blocked?
If possible, eliminate the cause of the problem
or contact the service hotline (see chapter
"Service").
Please note: If the overheating protection is
triggered for the second time, you should turn
OFF the device and contact the service hotline
(see chapter "Service") - regardless if you have
found the cause of the problem or not.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 2000 B2 - IAN 421470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 2000 B2 - IAN 421470 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info