Manual Silvercrest SKF 2800 A1 - IAN 95885 (page 57 of 62) (English, German, Dutch, French)

646955

Zoom out

Zoom in

1/62

SKF 2800 A1 55

Store the heating element 15 in a

secure, dry place.

4. Remove the fat container 13 from the

casing 8.

5. Clean the frying basket 14 and the fat

container 13 in hot water with a little

mild detergent or in a dishwasher.

6. Then rinse them with clean water and

dry them off carefully. Never use caustic

or abrasive cleaning agents or cleaning

materials such as scouring solution or

steel wool.

7. You can use a soft, damp cloth to clean

the casing 8 and the heating

element 15.

With stubborn dirt you can also use a

little mild detergent and wipe over again

with clean water.

8. Replace the fat container 13, heating

element 15 and the frying basket 14 in

the casing 8.

9. Close the lid 4.

10.Roll the mains cable up at the rear of the

casing 8.

Note You can easily transport the deep-fat

fryer using the carry handles 6 on the sides.

9.2 Remove lid and clean

The lid 4 of the deep-fat fryer can be

removed:

1. Open the lid 4

about halfway.

2. Little lugs A can be

found on the hinges

at the rear of the

appliance directly

under the springs.

Press these lugs and

pull the lid 4 up slightly.

3. Take off the lid 4.

4. Clean the lid 4 with a little mild

detergent in hot water.

5. Then rinse with clean water and allow to

dry off.

6. Insert the lid 4 back into its locators in

the casing 8.

Make sure that the hinges engage.

9.3 Storing

To store the appliance, wind up the mains

cable on cable store 16.

10. Various tips

Tip 1: How to avoid the excess

formation of acrylamide

Acrylamide is a chemical substance that is

formed whenever foods containing starch or

a certain protein compound at prepared at

temperatures over 100 °C.

• Wherever possible, you should avoid

excess browning, high temperatures for

baking or frying or fierce frying.

• You should not eat burnt food at all.

• When deep-frying, you should avoid

temperatures of over 170 °C.

• Make sure that the colour of the fried

items is “golden yellow” rather than

brown or dark. Browning may develop

very quickly. Use the viewing window to

observe the browning level of the fried

items.

RP95885 Fritteuse LB2 Seite 55 Montag, 17. Februar 2014 2:35 14

Bonjour,
je cherche à remplacer l'élément de commande chauffant (avec bouton reset).
Sur a pièce, j'ai comme référence WQS-245 A 1311/135-6/1S-24505 16A/V,
pouvez vous m'indiquer où puis-je la trouver?
Merci pour votre aide.
Submitted on 1-2-2017 at 09:21
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2800 A1 - IAN 95885 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKF 2800 A1 - IAN 95885 Manual

Product: