646955

Silvercrest SKF 2800 A1 - IAN 95885 Manual

56
Zoom out
Zoom in
Previous page
1/62
Next page
54
Note: Ensure the correct polarity (+/–)
when inserting the batteries. The correct
polarity is marked on the battery
compartment. The positive pole of the
battery must point upwards.
10.Close the battery compartment.
11. Insert the kitchen timer 12 in the heating
element 15.
8. After frying
1. Move up the handle of the frying
basket 1 until it audibly engages.
This raises the basket 14 out of the oil.
2. Press the unlock button 7 to release the lid.
The lid 4 will open.
3. Remove the frying basket 14.
4. Tip the fried items into a bowl, sieve, etc.
5. Turn the temperature selector 9 to the
lowest level "MIN".
6. Use the On/Off switch 11 to switch the
deep-fat fryer off.
7. Remove the mains plug after every use.
Warning! So that you do not
burn yourself, leave the hot oil or
fat to cool down before you pour it
away!
8. Pull out the heating element 15
upwards.
9. Remove the fat container 13 from the
casing 8.
10.Pour away the oil or fat (see
“9. Cleaning and storing” on page 54).
11. If you wish to discard the oil or fat, please
take note of “11.3 Oil” on page 56.
8.1 Re-use the oil or fat
Frying oil and fat age and develop
unhealthy substances. Please note therefore:
• Pour the oil or the still liquid fat through a
filter (e.g. tea towel) to filter out food
remains.
• The best place to store oil is in an oil
bottle in the fridge.
• Fat can be poured back into the cleaned
fryer, allowed to solidify and stored
together with the fryer at room
temperature.
9. Cleaning and storing
9.1 Cleaning the appliance
To ensure your product gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of
an electric shock:
• Remove the mains plug before each
clean.
• The heating element 15 and the
casing 8 must not under any circum-
stances be cleaned under running water.
1. Press the unlock button 7 to release the lid.
The lid 4 will open.
2. Remove the frying basket 14.
3. Pull out the heating element 15 upwards.
RP95885 Fritteuse LB2 Seite 54 Montag, 17. Februar 2014 2:35 14
… 56 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-skf-2800-a1---ian-95885

Reset search

  • Bonjour,
    je cherche à remplacer l'élément de commande chauffant (avec bouton reset).
    Sur a pièce, j'ai comme référence WQS-245 A 1311/135-6/1S-24505 16A/V,
    pouvez vous m'indiquer où puis-je la trouver?
    Merci pour votre aide.
    Submitted on 1-2-2017 at 09:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2800 A1 - IAN 95885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2800 A1 - IAN 95885 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info