Manual Silvercrest SKD 2300 A1 - IAN 90866 (page 55 of 62) (English, German, Dutch, French, Italian)

575461

Zoom out

Zoom in

1/62

SKD 2300 A1 53

• The remote control contains batteries.

Ensure that they are kept out of the reach

of children and are not swallowed.

Ingested batteries can be highly

dangerous. Obtain medical assistance

immediately if batteries are swallowed.

4.7 Handling batteries

Warning!

To prevent a risk of explosion,

normal batteries must not be

charged, heated or disposed of by

burning.

If battery acid has leaked, avoid

contact with skin, eyes and mucous

membranes to prevent injury. In the

event of contact with the acid, rinse

the affected areas immediately

with plenty of clean water and

contact a doctor at once.

Caution! To avoid damaging the product

and ensure it functions correctly, please

note:

• Always replace all batteries at the same

time.

• Do not use different battery types or a

mixture of new and old batteries at the

same time.

• Do not short circuit the batteries.

• Remove the batteries if the device is not

used for a long time. Leaking batteries

could damage the device.

4.8 Material damage

Caution! To avoid material damage,

please observe the following conditions.

• Remove the batteries from the remote

control if you are not using it for a

prolonged period of time. Leaking

batteries could damage the remote

control.

• Ensure that the feet are fitted correctly

(see “5.2 Setting up the appliance” on

page 53), otherwise the floor might be

scratched or scorched.

5. Unpacking, setting up and inserting the batteries

5.1 Mounting the appliance

Before the appliance can be used, the feet 7

must be screwed on as follows:

1. Unpack the appliance from the

packaging.

2. Remove the transport packaging.

3. Check that the appliance shows no signs

of damage.

4. Slide the feet 7 from the outside into the

corresponding supports on the

underside of the convector.

5. Secure the feet 7 firmly using the screws

supplied.

5.2 Setting up the appliance

Note: As the appliance and heating

elements are supplied with a thin film of

grease, there might be a small amount of

smoke and odour the first time the appliance

is used. This is not harmful and will stop after

a short while. Please ensure meanwhile that

there is sufficient ventilation.

Warning! Ensure that there is

sufficient distance from the wall,

fixtures and other appliances. The

distance must be at least 1 m to

exclude the risk of fire.

RP90866 Konvektor LB1 Seite 53 Dienstag, 2. Juli 2013 3:36 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKD 2300 A1 - IAN 90866 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKD 2300 A1 - IAN 90866 Manual

Product: