739871

Silvercrest SKAT 1000 EDS A1 IAN 86115 Manual

32
Zoom out
Zoom in
Previous page
1/35
Next page
- 29 -
• If you wish to deactivate the Timer, press the
button ON/AUTO/OFF 7 again so that the
integrated blue indicator lamp glows constantly.
Cleaning and care
Before cleaning, always remove the plug from the
wall power socket.
Risk of electric shock!
Before you clean the coffee machine you must remove
the plug from the mains power socket.
Attention!
Never submerse the coffee machine in water or other
fluids.
Risk of Burns!
Always wait until the coffee machine has cooled
down before cleaning it.
• Do not use household detergents or sharp/pointed
objects to remove soiling. These could damage
the appliance.
• Wipe the housing of the coffee machine and the
glass carafe with a soft cloth lightly moistened
with a soapy solution.
• After every brewing process remove the filter bag
from the filter holder 2.
• Remove the filter and rinse the filter holder 2
and the glass carafe q under running water.
• In cases of stubborn soiling, clean the filter
holder 2, measuring spoon w and the glass
carafe q in a mild dishwashing solution.
Rinse them off with clear water.
If you do not intend to use the coffee machine for
an extended period, stow the power cable in the
cable shaft at the rear of the coffee machine and
insert the power plug into the designated holes on
the cable shaft.
Removing scale
Remove scale from the coffee machine at regular
intervals.
The required descaling intervals can, subject to water
hardness, be very variable. Scale removal is already
necessary after ca. 30 brewing processes with hard
water, after ca. 60 brewing processes with soft water.
Your local water supplier will inform you about the
water hardness level in your locality.
Use only scale removal products that are suitable
for coffee makers and pay heed to the instructions
for use.
The procedure for scale removal is:
1. Place the scale removal product in the water
tank 3.
2. Insert the amount of water detailed in the usage
instructions for the descaler (max. 12 cups).
3. Press the button ON/AUTO/OFF 7 to start the
brewing process. The integrated red indicator
lamp glows.
4. Wait until the water for approx. 2 cups has passed
through and then stop the brewing process by
pressing twice on the button ON/AUTO/OFF 7.
The integrated blue indicator lamp glows con-
stantly and goes out after approx. 15 seconds.
5. Allow the descaling medium to stand for 15 minutes.
6. Repeat the steps 3 to 5 three times.
7. Then restart the brewing process and wait until
all of the solution has passed through.
8. Rinse the coffee machine through 3 times with
fresh water. All of the descaling medium residues
will then be removed and you can once again
use the coffee machine.
IB_86115_SKAT1000EDSA1_LB2 21.11.2012 12:02 Uhr Seite 29
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKAT 1000 EDS A1 IAN 86115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKAT 1000 EDS A1 IAN 86115 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info