739871
31
Zoom out
Zoom in
Previous page
1/35
Next page
- 28 -
Wait for approx. 15 seconds. The indicator
CLOCK disappears from the display 8.
The time display is now programmed.
or
Press the button PROG 6 twice, so that only the
time is to be seen in the display 8. The time
display is now programmed.
Note:
If the coffee machine is separated from mains power
(or subject to a short power failure), the programmed
time is saved for a maximum of 15 seconds. In the
event of a longer separation from mains power, the
time must be reprogrammed.
Making coffee
Avoid brewing less than 4 cups of coffee. Otherwise,
the coffee will not have the desired temperature
and strength.
Open the lid 1 and insert a filter bag (Size 1x4)
with folded over sides into the filter holder 2.
Using the measuring spoon w place coffee
powder into the filter bag. Subject to taste, you
will require approx one level measuring spoon w
of coffee powder per cup. A level measuring
spoon w approximates to about 5,5 gr of coffee
powder.
Fill the water tank 3 with the required amount
of water. For this, use the scale 9.
Never fill the appliance with water beyond the
max-marking (12 cups).
Close the lid 1, ensuring that it engages.
Place the glass carafe q in the coffee machine.
Press the button ON/AUTO/OFF 7 to start the
brewing process. The red indicator lamp integrated
into the ON/AUTO/OFF button 7 glows.
When the brewing process is finished you can
remove the glass carafe q and serve the coffee.
If you do not wish to serve the coffee immediately,
allow it to stand in the coffee machine.
The keep-warm plate 0 will keep the coffee
warm for 60 minutes. After 60 minutes the coffee
machine switches itself off automatically.
If you wish to switch the coffee machine off
manually, press the button ON/AUTO/OFF 7
twice so that the integrated blue indicator lamp
glows constantly. After approx. 15 seconds this
extinguishes. The coffee machine is now
switched off.
Note:
Allow the coffee machine to cool down for approx.
5 minutes before commencing a further brewing
process or filling it with water.
Timer-Function
By use of the button PROG 6 you can programme
the coffee machine so that it starts the brewing process
at a pre-determined time. First, ALWAYS place cof-
fee powder in the filter bag in the filter holder 2
and water into the water tank 3.Place the glass
carafe q in the coffee machine. Ensure that the
water tank 3 is not filled beyond the Max. marking
(12 cups).
Press the button PROG 6 twice, so that TIMER
appears in the display 8.
Programme in the desired start time with the button
HOUR 4 and the button MIN 5 (see chapter
"Setting the Time").
When the desired start time has been programmed
in, press the button ON/AUTO/OFF 7 twice.
The integrated blue indicator lamp blinks and
indicates thereby that the Timer is programmed.
The coffee machine starts the brewing process
at the programmed time.
IB_86115_SKAT1000EDSA1_LB2 21.11.2012 12:02 Uhr Seite 28
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKAT 1000 EDS A1 IAN 86115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKAT 1000 EDS A1 IAN 86115 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info