654497
40
Zoom out
Zoom in
Previous page
1/46
Next page
38
GB
carries on cooling the appliance after it
has been switched off.
After 120 minutes without a change in
setting, the appliance switches off auto-
matically. The cooling fan carries on
cooling the appliance after it has been
switched off.
8.3 Switching off with a
timer
1. Touch the symbol |
9
during operation.
The control light|
13
lights up,
min
ap-
pears above the display and on the dis-
play the chosen switch-off time appears
in minutes (presetting:
0
minutes, the de-
vice remains on).
2.
Change the switch-off time by touching
the symbol |
8
in one-minute steps and
by touching the symbol |
7
in 10-min-
ute steps. If you
have set the chosen time
and touch no further symbols, the timer
starts automatically and the display
switches over to W or °C again. At
short intervals, the remaining time is dis-
played together with min.
3. After the preset time has elapsed, the
appliance switches off. An acoustic sig-
nal sounds. The symbol -H- is shown in
the display, as the temperature of the
cooking zone is more than 60 °C. The
cooling fan carries on cooling the appli-
ance after it has been switched off.
8.4 Child safety lock
To prevent unwanted alteration of the set-
tings, the appliance is equipped with a child
safety lock.
NOTE: if the child safety lock is activated
while in operation, the symbols child safety
lock |6 and on/off |5 are not blocked
and you can switch the device off. You will
only be able to switch the device on, once
the child safety lock has been deactivated.
Touch the symbol child safety lock |6.
The control light for the child safety
lock|3 lights up and an acoustic signal
sounds. All symbols except the child
safety lock |6 are now blocked.
Touch the symbol child safety lock |6
for at least 4 seconds to override the
child safety lock. An acoustic signal
sounds and the control light for the child
safety lock|3 goes out. The symbols are
no longer blocked.
9. Cleaning
DANGER! Risk of electric shock!
Pull the mains plug|1 out of the wall
socket before you clean the device.
The induction hot plate, the power ca-
ble|1 and the mains plug|1 must not be
immersed in water or any other liquids.
DANGER! Risk of injury
through burning!
Allow the device to cool down be-
fore cleaning.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
Clean the cooking zone|2 after every
use. In this way, you can prevent any ad-
hering food residues from burning on.
Clean all surfaces and the power ca-
ble|1 with a slightly moistened cloth.
Baked-on residues on the cooking
zone|2 can be removed with a ceramic
hob scraper, which may be purchased
at a department store.
__RP100060_Induktionskochplatte_B2.book Seite 38 Mittwoch, 12. Februar 2014 12:15 12
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SIKP2000B1 - IAN 100060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP2000B1 - IAN 100060 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info