Manual Silvercrest SIKP2000B1 - IAN 100060 (page 39 of 46) (English, German, Dutch, French)

654497

Zoom out

Zoom in

1/46

8. Operation

DANGER! Risk of fire!

• Heat oil and fat carefully. Overheated

oil and fat is flammable. Do not leave

hot oil or fat unattended.

• DANGER OF EXPLOSION! Never

extinguish burning oil or fat with water.

Smother the flames by closing the cook-

ing vessel with a suitable lid or plate.

Pull out the mains plug.

DANGER! Risk of injury

through burning!

Do not touch the surface of an induc-

tion hot plate, on which a cooking

vessel has been used beforehand.

The temperature of the surface can

still be very high after a cooking ves-

sel has been removed.

8.1 Switching on

1. Place the cooking vessel in the middle

of the cooking zone|2.

2. Insert the mains plug|1 into a wall sock-

et corresponding to the specifications of

the rating plate. An acoustic signal

sounds. At the same time, the display

and control lights are activated shortly

so they can be checked for proper func-

tioning.

The display shows...

… - L -, if the temperature of the cooking

zone is less than 60 °C and

… - H -, if the temperature of the cook-

ing zone is more than 60 °C.

3. Switch on the appliance by touching the

symbol on/off |5.

The control light on/off|4 lights up.

The control light|12 over the symbol

|10 flashes.

W (watt) flashes over the display and

on the display you can see the chosen

power setting (presetting: 1000 watt).

NOTE: if you do not initiate any chang-

es within approx. 30 seconds by touch-

ing the symbols

/ |

8, the appli-

ance switches off automatically.

4. Change the heat output by touching the

symbols |7/ |8 in steps of 200|watt

from 200 - 2000 watt. The heating

phase begins immediately after you

have touched one of the two symbols.

The higher the chosen power, the quick-

er the base of the cooking vessel is heat-

ed up.

By touching the symbols |10, the dis-

play image changes from W (watt)

to|°C. You can now choose the desired

setting also as a temperature specifica-

tion in steps of 20 °C from 60 - 240 °C

(presetting: 120 °C). After the tempera-

ture has been achieved, it is kept at the

specified value.

You can change specified settings at

any time during operation.

You can also touch the symbols uninter-

ruptedly to change the settings.

8.2 Switching off

• Touch the symbol on/off |5, to switch

off the appliance. An acoustic signal

sounds. The symbol -H- is shown in the

display, as the temperature of the cook-

ing zone is more than 60 °C. The cool-

ing fan carries on cooling the appliance

after it has been switched off.

• The appliance automatically stops the

heat output if the cooking vessel is re-

moved from the cooking zone|2 during

the heating phase. The error message

E|1 is shown in the display and an

acoustic signal sounds. If you do not

place the cooking vessel on the hot

place within approx. 10 seconds, the

appliance switches off. The cooling fan

__RP100060_Induktionskochplatte_B2.book Seite 37 Mittwoch, 12. Februar 2014 12:15 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SIKP2000B1 - IAN 100060 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SIKP2000B1 - IAN 100060 Manual

Product: