737659

Silvercrest SHS 12.0 A1 IAN 63817 Manual

25
Zoom out
Zoom in
Previous page
1/33
Next page
26 GB/MT
Operation / Servicing and cleaning / Disposal
j Insert the small brush
7
snugly into the front
nozzle
4
.
Crevice tool
8
:
Use this attachment to get into narrow, difficult-to-
access places.
j Insert the crevice tool
8
snugly into the front
nozzle
4
.
Removing attachments:
Simply pull the attachment off the front nozzle
4
or the extension hose
5
.
Q
Switching On / Off
j Insert the 12 V plug
3
into the 12 V socket /
cigarette lighter socket of the vehicle, see Fig. C.
j To switch the device on, press the ON / OFF
switch
2
forwards into the ON position.
j To switch the device off, press the ON / OFF
switch
2
back into the OFF position.
j Pull the 12 V plug
3
out of the 12 V socket
after use.
Tip: If you going to vacuum for a long period, we
recommend that you carry out the cleaning with
the engine running.
Q
Fastening the storage bag to a
surface in your car boot
j You can fasten the storage bag
9
in a suitable
place, e.g. in the boot of your car. To do this,
press the bag lightly against a suitable textile
surface in your vehicle, for example the back
of the rear seats. The storage bag
9
is held in
place by two hook and loop fastening strips.
Q
Servicing and cleaning
The device requires no maintenance.
J ATTENTION! Before you clean the device
itself, pull the 12 V plug
3
out of the 12 V
socket, otherwise there Is a risk of electric shock.
j For the best possible performance, you should
empty the dust container
10
immediately after
use and when the suction power drops.
j Press the unlocking button
1
and take the
dust container
10
out of the housing
12
.
j Take out the dust filter
11
. You will be able to
clean the dust filter better if you detach it from the
end seal. To do this, hold the end seal firmly
and twist the filter off carefully anticlockwise
(bayonet fitting). Rinse out the dust filter
11
thoroughly in cold water and allow both parts
(filter and end seal) to dry completely. Attach
the filter back on to the end seal.
j Empty the dust container
10
completely.
j Carefully replace the dust filter
11
back into
the dust container
10
. Never use the vacuum
cleaner without the dust filter
11
in place.
j Attach the dust container
10
carefully back
on to the housing
12
and ensure the two parts
engage.
j Clean all the housing with a soft, dry cloth.
Never use liquids or cleaning agents, as they
may damage the device.
ATTENTION! The front nozzle
4
must be free
and unobstructed at all times. Blockages can lead
to overheating and damage to the motor.
Q
Disposal
The packaging is composed of environ-
mentally-friendly materials that can be
disposed of at a local recycling centre.
Do not dispose of electrical
devices with the household
rubbish!
In accordance with European Directive 2002 / 96 / EC,
worn out electrical devices must be collected
separately and taken for environmentally compatible
recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SHS 12.0 A1 IAN 63817 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHS 12.0 A1 IAN 63817 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SHS 12.0 A1 IAN 63817

Silvercrest SHS 12.0 A1 IAN 63817 User Manual - German, Dutch, French, Italian - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info