Manual Silvercrest SHBS 600 A1 - IAN 275147 (page 9 of 78) (English, German, Dutch, Danish, French)

663328

Zoom out

Zoom in

1/78

5. Charging

NOTES:

• Before first use (without cable), and for

every charging procedure afterwards,

charge the hair and beard trimmer4 for

a maximum of 90 minutes.

• When the battery is fully charged, the

device can be used for approximately

60 minutes without being connected to

the power supply.

• When the batteries are nearly empty,

the plug symbol flashes in the dis-

play7. The device can then only be

used for a short time (approx. 7min-

utes) without being connected to the

electricity supply.

1. Swivel the locking bar at the bottom of

the battery charger9 in clockwise di-

rection out of the locking position.

2. Figure A: plug the right angle connec-

tor of the power unit into the bottom of

the battery charger. Lock the connector

by swivelling the locking bar in anti-

clockwise direction until it stops.

3. Lay the power unit cable into the cable

guide of the battery charger9 and

place it onto a plane surface.

4. Switch off the device with the on/off

switch

6

if necessary.

5. Insert the power unit8 into a readily

accessible wall socket whose voltage

matches the voltage stated on the rat-

ing plate.

6. Put the hair and beard trimmer4 into

the battery charger9.

7. The charging indicator on the dis-

play7 flashes and the battery is

charged. If the battery is fully charged

the charging indicator glows con-

stantly and 60 MIN is shown on the

display.

6. Operation

Regardless of the charging state of the bat-

tery, the hair and beard trimmer can always

be mains-operated.

1. For mains operation, ensure that the

hair and beard trimmer4 is switched

off.

2. Connect the power unit8 to the con-

nector of the hair and beard trimmer4.

3. Insert the power unit8 into a readily

accessible wall socket whose voltage

matches the voltage stated on the rat-

ing plate.

4. Switch on the device with the on/off

switch 6.

6.1 Changing the comb

attachments

• Figure B: to attach the comb attach-

ments1 carefully push the appropriate

comb attachment onto the trimmer at-

tachment3. Let both pins of the comb

attachment1 engage properly into the

lateral grooves of the hair and beard

trimmer4.

• Figure C: to remove the comb attach-

ments1 slide the laterally engaged pins

out of the grooves of the hair and beard

trimmer4 and pull off the comb attach-

ment.

6.2 Changing the thinning

out attachment

• Figure D: to attach the thinning out at-

tachment2 carefully push it onto the

trimmer attachment3. Let both pins of

the thinning out attachment2 engage

properly into the lateral grooves of the

hair and beard trimmer4.

• Figure C: to remove the thinning out at-

tachment2 slide the laterally engaged

pins out of the grooves of the hair and

beard trimmer4 and pull it off.

BB*5$B%ERRN6HLWH'LHQVWDJ1RYHPEHU

Mines completely stopped working. wont recharge. Only had it long enough to recharge it about 3 times! Submitted on 18-7-2018 at 09:56
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SHBS 600 A1 - IAN 275147 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SHBS 600 A1 - IAN 275147 Manual

Product: