684430

Silvercrest SFS 18A1 - IAN 88818 Manual

73
Zoom out
Zoom in
Previous page
1/132
Next page
SilverCrest SFS 18 A1
English - 71
switched off, press the device button "A" (6)
immediately to stop the automatic search mode. Then
switch the device on again.
5. Now, check whether the buttons of the remote control
work correctly. If this is not the case, start scanning
again to find a suitable code.
Programming via manual scan
1. The device that you want to use must be switched on.
2. Point the remote control at the device. Press and hold
the selected device button, for example, "A" (6), for
approx. 3 seconds. Once the blue LED (4) lights up
continuously, the remote control is in manual search
mode.
3. Press the "VOL+" button (8) approximately every 1.5
seconds. Once the volume of your device changes or
the device is switched off, check whether the other
buttons on the remote control work correctly.
4. If the other buttons do not work, continue the manual
search by pressing the "VOL+" button (8) every 1.5
seconds.
5. If the other buttons work, save the code by pressing the
device button "A" (6).
6. The manual search is cancelled automatically if no entry
is made within 30 seconds.
Programming via the learning function
This function provides the option of transferring the code of
each button individually from your original remote control.
1. Press and hold the selected device button, for example,
"A" (6), until the corresponding LED lights up
continuously. Enter 9999 using the number buttons
(12). The remote control is now in learning mode.
2. Place the original remote control so that its IR LED and
the IR LED (2) of the remote control for seniors are
against each other with only a distance of
approximately 3cm at most between them.
3. First, press the button which you want to set on the
remote control for seniors. The LED then flashes
approximately 3 times per second. On the original
remote control, press the relevant button whose code
you want to copy. The successful transfer of the button
… 73 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFS 18A1 - IAN 88818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFS 18A1 - IAN 88818 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info