684430

Silvercrest SFS 18A1 - IAN 88818 Manual

72
Zoom out
Zoom in
Previous page
1/132
Next page
SilverCrest SFS 18 A1
70 - English
First use
To be able to use the remote control, you must first perform
one of the following steps.
Programming via manufacturer's code
1. On the remote control, select the device (A or B) which
you want to programme.
2. In the code list attached to these operating instructions,
find the appropriate 4-digit code for your device (e.g.
TARGA 1268) from the relevant device group (e.g. TV).
3. Press and hold the selected device button, for example,
"A" (6), for approx. 3 seconds. Once the blue LED (4)
lights up continuously, release the button. The remote
control is now in programming mode for approx. 10
seconds. If no entries are made within 10 seconds, the
programming mode is cancelled automatically.
4. Now, enter the 4-digit device code using the number
buttons (12). If the remote control accepts the code
which was entered, the blue LED (4) goes out. The code
is invalid if the LED (4) flashes twice. In this case, the
remote control remains in programming mode. Enter a
correct code within 10 seconds.
5. After entering the code, check whether the buttons on
your remote control work correctly. If the remote control
does not work correctly, try another 4-digit device code
of the same manufacturer (e.g. TARGA 1276). Repeat
steps 3 to 5 until the remote control works correctly.
Programming via automatic scan
1. The device that you want to use must be switched on.
2. Point the remote control at the device. Press and hold
the selected device button, for example, "A" (6), for
approx. 5 seconds. Once the blue LED (4) flashes, the
remote control is in automatic search mode.
3. The "VOL+" signal is now continuously sent to your
device (code scanning function). Once the volume of
your device changes, press the device button "A" (6)
immediately to stop the automatic search mode.
4. If your device is a CD player, a tuner or a cassette
player, rather than a TV, a POWER signal is
continuously sent to the device. Once your device is
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFS 18A1 - IAN 88818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFS 18A1 - IAN 88818 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info