Manual Silvercrest SFS 110 B2 - IAN 277100 (page 21 of 90) (English, German, Dutch, French, Portuguese, Spanish)

646936

Zoom out

Zoom in

1/90

7. Preparation

7.1 Setting up the device

Place the device on a dry, level and heat-re-

sistant surface.

7.2 Requirements on the

film/bags

- You can use tubular film or complete

bags.

- The film must not be wider than 28 cm.

- The film must be provided with dots/

knobs or grooves on one side. Smooth

films are not suited for sealing.

- Thickness should be between 0.17 and

0.29 mm (170 - 290 ).

- When buying the film, check the temper-

ature range it is suited for. The ideal

range is between -20 °C and +110|°C.

Such films can be deep-frozen or boiled.

The film included in the delivery is suited

for this application.

- You will find those data on the package

of the film or bag.

7.3 Producing a bag

If you use finished bags, these steps do not

apply.

1. Unwind the length of film from the roll

you require for your bag. Regarding the

length of the bag, remember that a

space of approx. 6 cm towards the top

should be left after filling.

2. Use scissors to cut the piece of film as

straight as possible.

3. For sealing the bag (see "Seal the bag"

on page 19).

8. Use

Every active function can be cancelled im-

mediately by pressing the button|3 .

WARNING! Risk of material

damage!

~ Observe the specified operating time of

the device. After the sealing or vacuum-

ing process, the device must cool down

for at least 80 seconds.

8.1 Fill the bag

CAUTION:

~ No food or liquids must be present at

the top edge, where you want to seal

the bag. That area must be clean and

dry. Otherwise, it is impossible to pro-

duce a proper welding seam.

• Fill the bag only up to a level of 6 cm

below the top edge.

8.2 Seal the bag

1. Smooth the bag where it is to be

sealed.

2. Open the lid|11. If necessary, press the

buttons|8 first.

3. Figure A: place the bag in the device.

For this purpose, the end of the film

must be positioned shortly in front of the

rear limitation webs|12 and the lateral

limitation webs|15.

4. Ensure again that there are no creases

in the film - especially in the area above

the welding wire|14.

5. Close the lid|11.

6. Figure B: use both hands to press firm-

ly on the edges of the lid|11. They must

engage audibly.

BB&3(B)ROLHQVFKZHLVVJHUDHWB%ERRN6HLWH'LHQVWDJ$SULO

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFS 110 B2 - IAN 277100 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SFS 110 B2 - IAN 277100 Manual

Product: