628971

Silvercrest SFR 3.7 A2 - IAN 106437 Manual

10
Zoom out
Zoom in
Previous page
1/74
Next page
7
SFR 3.7 A2
GB
IE
NOTE
► Only recharge the batteries when the suction
po
wer of the appliance is noticeably weaker
and the red indicator light 8 is fl ashing red.
Information about the battery
■ For care of the batteries, we recommend the
following: As soon as the batteries are charged,
disconnect the charger t from the mains. Do
not plug the charger t into the mains until the
appliance’s suction power has become notice-
ably weaker.
■ Never continue working until the batteries are
completely discharged and the appliance no
longer works. This can reduce the operating
life of the batteries.
Cleaning and care
DANGER – ELECTRIC SHOCK!
► Prior to cleaning, disconnect the appliance
fr
om the charger t! Risk of electric shock!
ATTENTION! DAMAGE TO PROPERTY!
► Do not use abrasive or aggressive cleaning
mater
ials. These could damage the surface
of the appliance!
Cleaning the spray bottle
■ Open the spray bottle and empty contents.
Remove the microfi bre cover z.
Wipe the components of the spray bottle with
a damp cloth; if necessary, use a little mild deter-
gent on the cloth.
The microfi bre cover z can be machine-washed
at 60°C. Do not use any fabric conditioner as
this signifi cantly reduces the cleaning power of
the microfi bres.
Cleaning the appliance
For thorough cleaning, disassemble the appliance.
1) Pull the vacuum attachment 1 from the con-
necting piece 2. Clean the vacuum attach-
ment 1 with a damp cloth. If required, use
some mild detergent on the cloth.
2) Press the release buttons 3 and at the same
time pull the connecting piece 2 from the
motor unit 7. Clean the connecting piece 2
with a damp cloth. If required, use some mild
detergent on the cloth.
3) Remove the dirt container 5 from the motor
unit 7.
Turn the blue nozzle 4 at the top end of the
dirt container 5 slightly anticlockwise and lift it
off . Now you can pull the blue rod downwards
out of the dirt container 5. Rinse the dirt con-
tainer 5 with clear water and, if necessary,
with a mild detergent.
4) Wipe the motor block 7 off with a damp cloth.
If required, use some mild detergent on the
cloth. Dry the motor unit.
5) Then reassemble the appliance.
– Put the blue rod back into the dirt container 5
and fi x it into place with the nozzle 4.
Make sure that the washers are correctly
placed.
– Place the dirt container 5 onto the motor
unit 7.
– Push the connecting piece 2 onto the motor
unit 7/the dir
t container 5, so that it clicks
into place.
– Push the vacuum attachment 1 onto the
connecting piece 2.
■ Wipe the charger t with a damp cloth. Ensur
e
that the charger t is completely dry before
reconnecting it to the mains.
Storage
■ Store the cleaned appliance in a clean, dust-free
and dry location.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFR 3.7 A2 - IAN 106437 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFR 3.7 A2 - IAN 106437 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info