628972

Silvercrest SFR 2.4 B1 - IAN 75760 Manual

19
Zoom out
Zoom in
Previous page
1/76
Next page
SilverCrest SFR 2.4 B1
English 17
Powering the Transmitter Cradle Off
You may power the transmitter cradle off whenever it is not needed. When powered off, it will not
transmit any RF signals but the headphones battery will still be charged.
1. Slide the On/Off switch (12) on the transmitter cradle to the “OFF” position. The send
indicator (17) on the transmitter goes out.
You may optionally power the transmitter cradle using conventional batteries. For more
information see page 21 – “Powering the Transmitter Cradle Using Batteries”.
Synchronising the Headphones and Transmitter Cradle
After powering the headphones and the transmitter cradle on, both devices should synchronise
automatically. This process may take a while (sometimes more than 1 minute), but normally you
just have to be patient.
Under unfavourable circumstances, however, the audio signal may be subject to interference. This
may happen if you are using a baby phone or a wireless keyboard and mouse set nearby. In this
case you can synchronise the devices manually to locate an interference-free channel.
1. Power the transmitter cradle on by sliding the On/Off switch (12) on the transmitter cradle to
the “ON” position.
2. Power on the connected audio source and start playback. The send indicator (17) on the
transmitter cradle should light up green.
3. Slide the mode selection switch (6) of your headphones to the “WL” position.
4. Power the wireless headphones on by pressing the On/Off button (9) once.
5. Press and hold the synchronisation button (3) of the headphones and the synchronisation
button (13) of the transmitter cradle for at least 1 second.
The RF reception indicator on the headphones (2) and the send indicator on the transmitter
cradle (17) start blinking. As soon as both devices have synchronised, both indicators will
light up green.
6. If necessary, repeat step 5 if you are not satisfied with the reception quality or you still have
interference from other devices.
Synchronising the transmitter cradle and the headphones can take a while. If
there are many wireless devices nearby using the 2.4 GHz RF technology, the
transmitter cradle and headphones first have to find a free communications
frequency. Any frequencies that are already occupied by other devices will
not be used. This is also known as “WLAN Skipping and Hopping”.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFR 2.4 B1 - IAN 75760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFR 2.4 B1 - IAN 75760 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info