679199

Silvercrest SFR 2.4 A1 - IAN 38018 Manual

36
Zoom out
Zoom in
Previous page
1/44
Next page
- 34 -
Note:
Do not recharge the battery after every use. Charge
the batteries only when the last charge LED 5 is
blinking. This will optimise the performance of the
battery.
Shaving using the
power adapter
Warning
When it is connected to the mains power adapter 9,
NEVER use the appliance in the bath, under the sho-
wer or close to a washbasin! Risk of electric shock!
Note:
On the first usage, there could be production-related
oil residues on the cutter foil. Wipe them off with an
absorbant and lint-free cloth.
Should you wish to use the razor without first charging
the battery, you can do so by using energy directly
from the mains power adapter 9:
1. Insert the connector plug 0 into the socket 6 on
the razor. Pay heed to the correct polarity:
The guide pillar in the socket 6 must grip the
guide rail on the connector plug 0. If it does not,
the connector plug 0 cannot be inserted.
2. Connect the plug with a mains power socket.
The razor can then be used.
Intended purpose
Shaving
This razor is suitable for both wet and dry shaving.
However, the best results are obtained with a dry
skin.
Warning regarding appliance
damage!
Do not use a shaving gel, as this can clog the cutter
foil and the cutter heads.
Note:
The appliance may not be used if you have skin
wounds, sunburn, pimples or blisters.
Note:
In the first 2 to 3 weeks you could suffer some light
skin irritation, until your skin has got used to the cutter
heads. Should the skin irritation continue beyond
this time, consult your doctor.
1. Remove the protective cap w.
2. Press the locking button 3 and, at the same
time, slide the On/Off switch 4 upwards. The
cutter heads rotate.
Warning regarding appliance
damage!
Avoid using too high pressure on the cutting foil, so
as to avoid breaking the foil. Further, too much pres-
sure on the skin can reduce the effectiveness of the
cutters and also lead to skin irritation.
3. Guide the razor upright and with light pressure
over the skin surface and against the direction of
hair growth. At the same time tense your facial
skin with your free hand, so that the whiskers stick
out. The razor should always be at a right angle
to the skin. A light circular motion of the cutter he-
ads helps ensure the capture of individual whiskers.
IB_38018_SFR24A1_LB5 24.08.2011 12:15 Uhr Seite 34
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFR 2.4 A1 - IAN 38018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFR 2.4 A1 - IAN 38018 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SFR 2.4 A1 - IAN 38018

Silvercrest SFR 2.4 A1 - IAN 38018 User Manual - German, Dutch, French, Italian - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info