679199
35
Zoom out
Zoom in
Previous page
1/44
Next page
- 33 -
Description of the appliance
1 Cutter foil retainer
2 Release tabs
3 Locking button
4 On/Off switch
5 Charge-LEDs
6 Socket
7 Storage case
8 Brush
9 Mains power adapter
0 Connection plug
q Long hair trimmer
w Protective cap
Technical Data
Mains adapter
Input voltage: 100 - 240 V
~
50/60Hz
Output Voltage: 4 V 400 mA
Protection class: IPX4
Electric razor
Input voltage: 4 V 400 mA
Batteries : 2 x AAA, Ni-MH
Protection class: IPX4
Shaving without the
power cable
Note:
On to the first usage, there could be production re-
lated oil residues on the cutter foil. Wipe them off with
an absorbant and lint-free cloth.
+
Attention! Appliance Damage!
NEVER use the razor in the bathtub or shower. This
could irreparably damage the appliance.
This razor can be used without the power cable. In
this case, you must charge it before the
ffiirrsstt
use for
about 14 hours.
1. Check to ensure that the appliance is switched off.
2. Insert the connector plug 0 into the socket 6
on the razor. Pay heed to the correct polarity:
The guide pillar in the socket 6 must grip the guide
rail on the connector plug 0. If it does not, the
connector plug 0 cannot be inserted.
3. Connect the plug with a mains power socket. The
batteries are being charged.
Note:
To optimise the life of the batteries, if possible do not
interrupt the charging process until the batteries have
been fully charged.
Furthermore, it can happen that if you interrupt the
charging process, the charge LEDs 5 will not indi-
cate the correct load capacity of the battery's!
The charge LEDs 5 indicate to what extent the ap-
pliance is charged: The more charge LEDs 5 there
are that glow permanently, the higher the current
charge is. When the appliance is fully charged (from
a complete discharge, this will be after about 8
hours), remove the connection plug 0 from the
socket 6 and disconnect the power adapter 9 from
the mains power supply. The razor can now be used
without the power cable.
Note:
The full charging process after complete discharge
of the batteries takes approx. 8 hours. You can then
use the razor for approx. 60 minutes.
IB_38018_SFR24A1_LB5 24.08.2011 12:15 Uhr Seite 33
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SFR 2.4 A1 - IAN 38018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFR 2.4 A1 - IAN 38018 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SFR 2.4 A1 - IAN 38018

Silvercrest SFR 2.4 A1 - IAN 38018 User Manual - German, Dutch, French, Italian - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info