Manual Silvercrest SFB 10.1 C3 (page 103 of 116) (English, German, Dutch, French)

539995

103

Zoom out

Zoom in

1/116

SilverCrest SFB 10.1 C3

English - 101

3. Press , select “CODE SET” and press to confirm.

4. Then press the device button or that you wish to

program and press to confirm.

5. The first digit of the 4-digit device code currently set flashes.

6. Enter the correct 4-digit code for the selected device using the

number buttons, then enter the number of the corresponding code list

(0 to 7) and press to confirm.

7. Press to confirm the entry. The display reads “SUCCESS”

followed by “CODE SET”.

8. Invalid CODES cannot be found in the CODE list. If you enter an

invalid code “NOT FOUND” appears on the display and you can

then enter the correct code.

Press to go back one menu level. To return to the start window,

press one of the device buttons. On the left of the time the code assigned

to the device button or is shown on the display. The

selected code list (0 to 7) is also displayed to the left of the day of the

week.

Before you can program the device buttons or using the

brand code search or automatic search, it is necessary to assign the code

list to the device button. To do so, proceed as described in the previous

section, select the number 0001 as your code and select the number of

the desired code list (0 to 7). This assigns the code list to the device

button or so you can proceed with programming.

At this point, programming the device buttons or works

the same way as described in the “Automatic code search (AUTO

SRCH)” and “Brand code search (BRAND SRCH)” chapters.

System configuration (CONFIGURE)

Setting the time (TIME SETUP)

1. Press and hold the button for 3 seconds.

2. Press , select “CONFIGURE” and press to confirm.

3. Press , select “TIME SETUP” and press to confirm.

4. Press , select between “12HR” and “24HR”.

5. Press to toggle to time setting mode. The hour display flashes.

6. Press and select the correct value for the hour. You

can also adjust the value by using the numeric keypad (11).

7. Press to toggle to minute setting mode.

8. Press and select the correct value for the minutes. You

can also adjust the value by using the numeric keypad (11).

9. If you selected “12HR” in step 4, you can press to select the

PM/AM setting. Press to toggle between PM and

AM.

10. Press to confirm your entry and save the setting. The display

reads “SUCCESS” followed by “TIME SETUP”.

Press to go back one menu level. To return to the start window,

press one of the device buttons.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SFB 10.1 C3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SFB 10.1 C3 Manual

Product: