Manual Silvercrest SEKE400A1 - IAN 61661 (page 8 of 14) (English)

685565

Zoom out

Zoom in

1/14

tion only after the signal sound (if nec-

essary, using a towel) because hot

steam will escape.

- Since the handle of the egg tray 2 gets

hot, use a towel or oven gloves to

remove it.

1. Insert the power plug in an easily

accessible socket with earthing con-

tacts.

2. Switch the appliance on by setting the

on/off switch 6 to I. The red pilot lamp 6

indicates that the appliance is heating

up.

3. The water is now boiling and the eggs

are boiled. The end of the boiling time

is indicated by a signal tone. Now

switch the appliance off by setting the

on/off switch 6 to 0.

4. Carefully remove the lid 1 from the

appliance using the handl. Place the lid

on a heat-resistant surface because it

is very hot.

5. Use the handl to remove the egg tray 2

and run the eggs under cold water to

cool them.

After boiling

DANGER! Disconnect the power

plug from the wall socket every

time you have boiled eggs.

• Leave the appliance to cool down,

before you ...

… pour away any water left,

… pour in new water,

… clean the appliance,

… tidy away the appliance.

5. Preparing eggs with

various hardness

levels at the same time

You can use this egg boiler to prepare eggs

with various levels of hardness at the same

time.

1. Prepare all eggs as usual.

2. First of all, prepare all eggs with the

hardness setting for the softest eggs.

3. When the signal indicates the end of

the boiling time, switch the appliance

off, carefully remove the lid 1, remove

the eggs that should not boil any fur-

ther and cool them with cold water.

4. The rest of the eggs remain in the egg

boiler.

5. Put the lid 1 back on.

6. Use the hardness controller 5 to set the

desired subsequent boiling time for the

remaining eggs. The small egg

symbols roughly correspond to the fol-

lowing subsequent boiling times:

: Difference between soft and

medium or medium and hard

: Difference between soft and hard

TIP: Here, too, there are deviations

resulting from varying numbers and

sizes of eggs. Adjust the setting

accordingly.

7. Switch the appliance on again.

8. When the signal indicates the end of

the boiling time, switch the appliance

off, carefully remove the lid 1, remove

the remaining eggs and cool them with

cold water.

__RP61661_B6.book Seite 6 Montag, 29. November 2010 9:48 09

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SEKE400A1 - IAN 61661 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SEKE400A1 - IAN 61661

Silvercrest SEKE400A1 - IAN 61661 User Manual - German, Dutch, French - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SEKE400A1 - IAN 61661 Manual

Product: