576610
7
Zoom out
Zoom in
Previous page
1/73
Next page
- 4 -
6. Before the first usage
Before taking the appliance into use check to ensure
that the appliance, the power plug and the power
cable are all in a serviceable condition and that all
packaging materials have been removed.
First clean the appliance as described chapter
“8. Cleaning and care”.
Lightly grease the baking surfaces with an oil
that is suitable for baking/grilling. In this way any
production-related residues on the baking surfaces
are better dissolved.
Heat the appliance briefly to the maximum
temperature with the lid closed:
Note:
On this first use, the development of a light odour
may occur, caused by production residues (a slight
smoke development is also possible). This is normal
and dissipates after a short time. Provide for sufficient
ventilation. For example, open a window.
1. To do this, insert the plug into the wall socket and
set the browning regulator 2 to level 5.
2. The red operating light 1 glows as long as the
power plug is in the socket. The green operating
light 1 glows as soon as the appliance is suffi-
ciently warmed up.
• Remove the power plug and, with the lid open,
allow the appliance to cool down.
Clean the appliance again as described under
“8. Cleaning and care”. The waffle maker is now
ready for use.
7. Baking waffles
When you have prepared a pastry that is intended
for baking in the waffle machine:
1. Heat the appliance with the lid closed. To do this,
insert the plug into the wall socket and turn the
browning regulator 2 to level 3. The further you
turn the browning regulator 2 to the right, the
darker the waffles will be baked.
2. As soon as the green operating light 1 glows
the appliance is sufficiently warmed up.
Note:
If you have prepared a low-fat dough, for example
curd cheese dough, then lightly oil the baking surfaces
with an oil that is suitable for baking.
• Spread the dough evenly over the lower baking
surfaces. To determine the correct amount of
dough, fill it until the pastry is just touching the
edge of the baking surfaces. If necessary, increase
or decrease the amount of dough used in the next
waffle. Ensure that the batter does not run over
the edge of the baking surfaces.
Close the lid.
• After 2 minutes at the earliest you can open the
lid to check the baking result. Opening the lid
earlier will only tear the waffle.
• After about 3 minutes the waffle is baked.
Note:
As the ideal level of browning is very dependent on
personal taste and the type of pastry, the baking
time can vary: Therefore, bake the waffles until your
personally desired level of browning is achieved.
The level of browning can be determined either by
adjusting the browning regulator 2 or by the length
of baking time. In this way you can bake crispy
golden waffles.
IB_100073_SDW1200B2_FI_DK_BE 28.05.2014 15:52 Uhr Seite 4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDW 1200 B2 - IAN 100073 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDW 1200 B2 - IAN 100073 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info