Manual Silvercrest SDW 1200 B2 - IAN 100073 (page 8 of 73) (English, German, Dutch, Danish, French, Swedish, Finnish)

576610

Zoom out

Zoom in

1/73

- 5 -

• When removing the waffles ensure that you do

not damage the coating of the baking surfaces.

If you do, it will be harder to separate the waffles

from the surfaces.

Note:

The baking surfaces do not need to be greased

before each fresh waffle.

• After baking the last waffle, remove the power

plug from the wall socket and allow the appliance

to cool with the lid up.

8. Cleaning and care

Risk of electric shock!

Never open the casing of the appliance. There are

no user-serviceable elements inside. When the ca-

sing is open, there is the risk of receiving a fatal

electrical shock. Before cleaning the appliance,

remove the power plug from the wall socket and

allow the device to cool down completely.

Attention!

Under no circumstances may the components of the

appliance be submerged in water or other liquids!

There would be the risk of a fatal electric shock

upon the next use of the appliance should moisture

be present in the voltage conducting elements.

• First of all, clean the baking surfaces with a dry

paper towel to soak up the grease residue.

• Then clean all surfaces and the power cable with

a lightly moistened dish cloth. Always dry the

appliance well before using it again.

Attention!

• Do not use chemical or aggressive cleaning

agents or solvents. These could not only cause

damage to the appliance, they can also leave

traces that could be baked into the next waffles.

• Under no circumstances should you use hard

objects for cleaning. These could damage the

coatings of the baking surfaces.

For greasy soiling:

Apply some mild detergent onto a damp cloth. Use

it to rub the greasy soiling away. If this still does not

dissolve it, use a soft washing-up brush.

Remove the detergent residues thoroughly with a

wash cloth moistened with clean water. Completely

remove the detergent residues from the cloth with

clean water and then repeat the cleaning process

until all detergent residues are removed from the

waffel surfaces.

If you do not, there may be residues in the next waffles!

In the case of stubborn residues:

Place a piece of damp cloth on the stubborn

residues, so as to soften them. After that, you can

then remove the softened residues with a wet cloth.

IB_100073_SDW1200B2_FI_DK_BE 28.05.2014 15:52 Uhr Seite 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDW 1200 B2 - IAN 100073 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDW 1200 B2 - IAN 100073 Manual

Product: