Manual Silvercrest SDRB 1000 A1 - IAN 68982 (page 46 of 62) (English, Italian, Portuguese, Spanish)

679065

Zoom out

Zoom in

1/62

- 44 -

• Close the water fill opening 2 to the water tank 1.

Ensure that the lug on the water fill opening 2

sits in the indentation on the lid. Only in this way

is the water tank 1 properly closed.

• Replace the water tank 1 back onto the appliance.

The water tank 1 must audibly engage with the

unlocking device for the water tank 4.

Attaching/detaching the brush

attachment

Attention!

NEVER attempt to attach or detach the brush attach-

ment w when the appliance is heated up. Risk of Burns!

• To use the steam and brush function, place the

brush attachment w onto the steam brush.

• To do this, slide the brush attachment w all the

way along the guide to the end. The unlocking

device of the brush attachment q must engage

audibly.

• To be able to use the ironing function, remove

the brush attachment w from the steam brush.

• To do this, press the unlocking device q down-

wards and, at the same time, pull the brush attach-

ment w away to the front.

Steam brush function

• Place the brush attachment w onto the applian-

ce. This must engage audibly with the unlocking

device on the brush attachment q.

• Insert the power plug 7 into a correctly installed

and earthed mains power socket.

• To generate steam, set the temperature regulator

3 to at least ••• or higher. The heating-up con-

trol lamp 5 glows. As soon as the set temperature

has been reached, the heating-up control lamp

5 goes out.

Note:

For the steam blast function, set the temperature

regulator 3 to at least •••.

At lower settings the temperature is not sufficient to

generate a steam blast.

• By pressing the steam blast button 8 you can

now produce jets of steam.

Note:

To release the first steam blast after heating the

appliance up, it can happen that you may need

to press the steam blast button 8 several times in

succession.

The appliance is now ready for use.

Attention!

The steam brush can be used with all clothing items.

Caution is to be exercised with heat-sensitive materials

such as synthetics, polyamides or artificial silk. With

these materials you should first check at a concealed

part (inside seam) that the hot steam will not cause

any damage to the garment. Do not touch these ma-

terials directly with the hot sole of the iron 0. Use

only the steam blast.

Clothing care

• Suspend the crumpled garment from a coat hanger.

• With one hand pull the garment flat, then steam it

from top to bottom. The combination of steam and

clothes brush r will gently remove all creases.

• Use light pressure with the clothes brush r and

guide the appliance from top to bottom over the

garment. You can thereby press the steam blast

button 8 in short intervals.

Note:

You can repeatedly press the steam blast button 8

until the heating-up control lamp 5 glows or water

drips from the sole of the iron 0.

Then, wait until the heating-up control lamp 5 extin-

guishes before activating a further blast of steam.

IB_68982_SDRB1000A1_LB5 17.08.2011 11:39 Uhr Seite 44

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDRB 1000 A1 - IAN 68982 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDRB 1000 A1 - IAN 68982

Silvercrest SDRB 1000 A1 - IAN 68982 User Manual - German, Dutch, French, Italian - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDRB 1000 A1 - IAN 68982 Manual

Product: