Manual Silvercrest SDRB 1000 A1 - IAN 68982 (page 45 of 62) (English, Italian, Portuguese, Spanish)

679065

Zoom out

Zoom in

1/62

- 43 -

• Fill the water tank 1 with water (see chapter "Fil-

ling with water").

• Insert the power plug 7 into a correctly installed

and earthed mains power socket.

• Hold the steam brush horizontally.

• Place the temperature regulator 3 at the position

"MAX".

• Heat the steam brush up at the highest setting for

a few minutes. By doing this you will clear produc-

tion residues from the sole 0 of the appliance.

• Activate the steam shot button 8 a few times, so

that steam exits from the soleplate 0.

• Then iron a redundant piece of material, this will

remove any impurites that may possibly be on

the sole of the iron 0.

Note:

On the first heating up of the appliance a small volume

of smoke and smell may be generated, caused by

production residues. This is completely normal and

is not dangerous. Provide for sufficient ventilation,

for example, open a window.

Operation

Note:

• Should the care instructions in the clothing item

forbid ironing (Symbol ), you may not use

the steam brush on it. If you do so, the clothing

item could be permanently damaged.

• Do NOT use the appliance on leather, velvet, im-

pregnated furniture or steam sensitive materials.

If you do, the material/furniture could become

damaged.

Filling with water

Attention!

Fill the watertank 1 exclusively with tap water or distil-

led water mixed with tap water. Never fill watertank 1

with chemical substances, cleaning agents (with the ex-

ception of decalcification agents) or other liquids.

Do not use chemically distilled water. This would

irreparably damage the appliance.

Should the mains water at your locality be rated as

hard, it is recommended that you mix mains water

with some distilled water. Otherwise, the jets for the

steam blast function could calcify (become blocked)

prematurely.

To extend the optimal steam blast function, mix mains

water with distilled water according to the table.

The water hardness level can be queried at your

local water works.

Attention!

Before refilling with water, ALWAYS remove the

plug 7 from the mains power socket! There is a

risk of electric shock!

• Lift the water tank 1 up vertically, in that you slide

the release 4 for the water tank 1 to the rear until

the water tank 1 allows itself to be lifted off. Grasp

the water tank 1 with your thumb and index finger

on the hatched markings to lift it vertically upwards.

The temperature controller 3 remains on the appli-

ance and is not lifted off.

• Open the water fill opening 2 to the water tank 1.

• Using the measuring beaker t, fill the water

tank 1 with mains water to the "Max" marking,

but no further.

Water hardness

Ratios - distilled

water to mains water

very soft / soft 0

medium 1: 1

hard 2: 1

very hard 3: 1

IB_68982_SDRB1000A1_LB5 17.08.2011 11:39 Uhr Seite 43

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDRB 1000 A1 - IAN 68982 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDRB 1000 A1 - IAN 68982

Silvercrest SDRB 1000 A1 - IAN 68982 User Manual - German, Dutch, French, Italian - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDRB 1000 A1 - IAN 68982 Manual

Product: