679148

Silvercrest SDG 800 A1 - IAN 71108 Manual

13
Zoom out
Zoom in
Previous page
1/36
Next page
15 GB/IE/CY
Initial Operation / Cleaning and maintenance / Service
18
Q
Descaling the Base of the
Appliance / Water Tank
ATTENTION! RISK OF INJURY! Always switch
the appliance off and pull the mains
18
plug prior
to all occupations with the electrical appliance.
ATTENTION! HAZARD OF BURNS! Let the
steamer completely cool down before descaling it.
Descale the base of the appliance / water
tank
10
regularly in order to maintain the steam
generation and to extend the lifespan of the ap-
pliance. The amount of limescale deposit caused
will depend on the water hardness type. Descale
the tank
10
after every seventh to tenth use.
Slight and persistent scale:
For slight scale, use a cloth moistened with
vinegar.
Wipe the scaled areas with it.
Use correspondingly more vinegar for persistent
scale.
Then rinse and dry the appliance thoroughly.
Descale the base of the appliance /
water tank:
Place the turbo ring
8
with the upside down
on the heating element
11
(larger side faces
upwards).
Fill the base of the appliance / water tank
10
with cold water up to the MAX mark
19
.
Fill the inside of the turbo ring
8
with usual
decalcifier.
Do not heat the appliance.
Leave the appliance to descale overnight.
Pour the decalcifier out and rinse the appliance
thoroughly.
Then wipe and dry the appliance thoroughly.
Q
Cleaning and maintenance
ATTENTION! HAZARD OF INJURY!
Always switch the appliance off and pull the mains
plug
18
prior to all occupations with the appliance.
ATTENTION! HAZARD OF BURNS!
Let the steamer completely cool down before
cleaning it.
CAUTION! RISK OF DAMAGE TO THE
PRODUCT! Do not use any aggressive cleaning
materials, such as scouring powder, scouring pads,
steel wool, washing soda or bleach. They could
damage the housing surface.
Clean the steamer regularly, best after every use.
Do not at all immerse the appliance in water.
Wipe out the base of the appliance
10
with a
damp cloth.
Clean all the demountable parts in hot water
with a little detergent using a washing-up brush.
Then rinse all the parts thoroughly and dry
them carefully.
Q
Service
Have your device repaired
at the service centre or by qualified
specialist personnel using original
manufacturer parts only. This will ensure
that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDG 800 A1 - IAN 71108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDG 800 A1 - IAN 71108 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDG 800 A1 - IAN 71108

Silvercrest SDG 800 A1 - IAN 71108 User Manual - German, Dutch, French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info