Manual Silvercrest SDG 800 A1 - IAN 58820 (page 7 of 14) (English)

679154

Zoom out

Zoom in

1/14

9 GB/IE

Initial Operation

points to the front towards the keypad and is

level. Thus, the turbo ring

will be kept in

position.

j Place the food in the steam trays

j Ensure that all parts are positioned correctly

before switching on the appliance.

ATTENTION! Never use bowls or other parts,

not especially produced for this appliance.

Otherwise, there may be the risk of injuries

and / or damage of the appliance.

j Now place the steam trays

1 - 2 - 3 succession (please see the markings on

the handles) on top of the condensate collection

basin

j Place the cover

centrically so that the upper

steam tray

is completely closed and no

steam can exhaust.

j Connect the mains plug

to a suitable socket.

j The LC display

shows “45” (see Fig. B).

Now your steamer is ready for use.

Setting the clock

Proceed as follows:

j Simultaneously press the PROG

and ON /

OFF

buttons for 2 - 3 seconds. A signal tone

will be heard on releasing the buttons.

j Press the PLUS button

to increase the time

indicator

by 10 minutes each time. Press the

MINUS button

to reduce the time indicator

by 1 minute each time.

j Press the PROG button

to conﬁrm your setting.

j The LCD-display

will now show the current

clock time (clock time mode).

Using Immediate-Start Function

Note: Consider that the base of the appliance /

water tank

has to be ﬁlled with water at least

up to the MIN mark

. Ensure that the turbo ring

in addition to the condensate collection basin

has been correctly positioned.

j Press the ON / OFF button

. The LCD dis-

play

will show the factory-set steaming time

of 45 minutes (see ﬁg. B).

j Press the PLUS / MINUS button

to increase

the steaming time in 5-minute steps or decrease

it in 1-minute steps.

Note: The maximum steaming time is 90 minutes.

Note: Be aware that you might have to replen-

ish water when the steaming time is longer.

Use the openings on the sides of the conden-

sate collection basin

for reﬁlling. If the base

of the appliance / water tank

is ﬁlled up to

the MAX mark

, it will be suﬃcient for approx.

1 hour of steaming.

ATTENTION! HAZARD OF BURNS!

Make sure that the water does not exceed the

MAX mark

. Otherwise, hot water may spurt

out of the steamer during operation.

j Press the ON / OFF button

. The device sounds

a beep. The red indicator light

comes on

and the device starts the steaming process.

j The LCD-display

will indicate the remaining

steaming time.

ATTENTION! HAZARD OF BURNS! The

appliance will become hot during use. Beware

of getting in contact with the ascending steam

or any components.

j If the set steaming time is elapsed, the appli-

ance will automatically switch back to the

keep-warm mode (see “keep-warm mode”).

Note: You can increase the steaming time at

any time in 5-minute steps or decrease it in

1-minute steps by pressing the PLUS / MINUS

button

. As soon as the steaming time is set

manually to “0”, the device switches automati-

cally into the warm mode (see “Warm mode”).

ATTENTION! HAZARD OF BURNS!

Always lift the cover

slowly, turning away

from you and let the steam exhaust backwards.

Do not bend over the appliance during steam

generation. Use oven cloths when touching the

cover

and the steam trays

. Use

a long fork or tongs when checking if the food

is done.

j Press the ON / OFF button

to terminate the

steaming process prematurely or to switch oﬀ

58820_Dampfgarer_Content_LB6.indd 9 11.10.10 10:42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDG 800 A1 - IAN 58820 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDG 800 A1 - IAN 58820

Silvercrest SDG 800 A1 - IAN 58820 User Manual - German, Dutch, French - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDG 800 A1 - IAN 58820 Manual

Product: