Manual Silvercrest SDB 2400 E3 - IAN 279179 (page 12 of 83) (English, German, Dutch, Danish, French)

656664

Zoom out

Zoom in

1/83

When the safety shut-off is activated, an

alarm sounds for approx. 3 seconds and the

symbol |6 starts to flash until the function

is switched off.

Switching off the function

Pick up the steam iron by its handle|8 and

hold it horizontally for a few seconds or

make some ironing movements.

8. Cleaning

DANGER!

~ Pull the mains plug|10 out of the wall

socket before you clean the steam iron.

~ Allow the device to cool down before

cleaning.

CAUTION:

~ Do not use any astringent or abrasive

cleaning agents.

Cleaning the device

• For cleaning the device, use a soft,

moistened cloth.

• Dirt can be removed from the sole

plate|18 using commercially available

cleaning agents for chrome, silver or

stainless steel.

• Residues that have melted on can be re-

moved by heating the steam iron up to

the MAX setting and then ironing an

old cotton cloth.

Self-cleaning

CAUTION:

~ Do not put vinegar, limescale remover

or any other additives into the water

tank|13. Additives can damage the de-

vice.

If you use tap water, you should run the self-

cleaning cycle after every use. Otherwise

use the self-cleaning cycle at least twice per

month.

1. Fill the water tank|13.

2. Place the steam iron on the base

unit|12.

3. Connect the mains plug|10 with the

wall socket.

4. Set the steam flow rate controller|3 to

and set the temperature control-

ler|15 to MAX.

5. Wait until the temperature control lamp

|7 goes out.

6. While doing so, hold the device hori-

zontally over a heat-resistant household

dish.

7. Press the

|16 SELF CLEAN

button and

hold it down. Limescale residues will now

be ejected with steam and hot water from

the steam outlet holes in the sole plate|

Hold the button down until no more steam

or water emerges.

8. Repeat steps 1 to 7 until no more resi-

dues are coming out.

9. Pull out the mains plug|10, allow the

device to cool down, and pour off any

remaining water.

9. Storage

DANGER!

Store the steam iron out of the reach of

children.

1. Finish ironing, set the temperature con-

troller|15 to MIN and pull out the

mains plug|10.

2. Allow the device to cool down.

3. Set the steam flow rate controller|3 to

4. Pour off any remaining water through the

filler opening of the water tank (under

lid

5. Store the iron in an upright position.

BB1$6B%XHJHOHLVHQB%ERRN6HLWH)UHLWDJ2NWREHU

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 E3 - IAN 279179 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDB 2400 E3 - IAN 279179 Manual

Product: