Manual Silvercrest SDB 2400 E3 - IAN 279179 (page 11 of 83) (English, German, Dutch, Danish, French)

656664

Zoom out

Zoom in

1/83

7. Finish ironing, set the temperature con-

troller|15 to MIN and pull out the

mains plug|10.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|13 through the filling open-

ing in the water tank (under the lid|2).

6.5 Ironing with steam

Steam ironing requires a high temperature,

at least the temperature setting for . In or-

der to additionally dampen items of cloth-

ing, the spray function is also available.

1. Set the steam flow rate control|3 to

and set the temperature controller|15 to

MIN.

2. Fill the water tank|13.

3. Place the steam iron on the base unit|12.

4. Connect the mains plug|10 with the

wall socket.

5. Set the temperature controller|15 to the

desired temperature (at least ). The

temperature control lamp |7 lights

up.

6. As soon as the ironing temperature has

been reached and the temperature control

lamp |7 goes out, adjust the steam

flow rate controller|3 to the desired steam

flow rate and start ironing.

The steam will ...

… start to come out as soon as you hold

the steam iron horizontal, and

… stop as soon as:

- you hold the steam iron vertically,

- you place the steam iron on the base

unit|12,

- the temperature is too low,

- the water tank|13 is empty

- you set the steam flow rate control-

ler|3 to .

7. Finish ironing, set the temperature con-

troller|15 to MIN, set the steam flow

rate controller|3 to and pull out the

mains plug|10.

8. Allow the steam iron to cool down, and

pour off any remaining water from the

water tank|13 through the filling open-

ing in the water tank (under the lid|2).

6.6 Steam jet function

The steam jet function requires a high tem-

perature. Select a temperature setting be-

tween and MAX. For this purpose, the

water tank|13 must be at least one quarter

full. The steam flow rate controller|3 is locat-

ed to the left on the symbol .

• Press the steam jet button while the

steam iron glides over the item of laun-

dry|4 .

• Wait a few seconds before you press

the steam jet button|4 again.

NOTE:

• For smoothing items of clothing that are

hanging up, you can use the steam jet

Button in a vertical position.

7. Safety shut-off

DANGER! - Fire hazard!

Despite the automatic switch-off, the

steam iron must not be left

unsupervised.

Your steam iron possesses a safety shut-off of

the heating function (AUTO SHUT OFF).

Activating the function

7he automatic switch-off occurs, if

- the device has stood still in vertical posi-

tion for approx. 8 minutes.

- the device has stood still on the sole

plate for approx. 30 seconds.

- the device has laid on its side for ap-

prox. 30 seconds.

BB1$6B%XHJHOHLVHQB%ERRN6HLWH)UHLWDJ2NWREHU

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 E3 - IAN 279179 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SDB 2400 E3 - IAN 279179 Manual

Product: