Manual Silvercrest SCNM100A1 - IAN 413627 (page 45 of 64) (English)

806099

Zoom out

Zoom in

1/64

Sewing applications

8. Use the seam ripper to cut open the center of the button-

hole.

CAUTION

When cutting the buttonhole with the seam ripper, do not place

your hands in the cutting direction, otherwise injuries may

result.

NOTE

Be careful not to accidentally cut into the bar tack. Use a pin as

a stopper at the bar tack so you do not cut too much.

7. After sewing the buttonhole stitch, raise the buttonhole lever

① as far as it will go.

1. Hook a gimp thread (a heavy thread or cord) to the back

of the buttonhole foot.

2. Bring the ends of the gimp thread to the front of the foot and

insert them into the notches; then knot them temporarily.

3. Lower the two-step presser foot lever (22) and start sewing.

NOTE

Set the stitch width to match the diameter of the gimp thread.

4. Once sewing is completed, pull the gimp thread gently to

remove any slack.

5. Thread the gimp thread ends into a larger hand needle.

Pull the ends to the back of the fabric and knot them before

cutting off the overhangs ①.

vSewing a buttonhole on stretch fabrics:

NOTE

It is suggested that you sew with a stabilizer material under the

fabric.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SCNM100A1 - IAN 413627 in the language / languages: English as an attachment in your email.

The manual is 6.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SCNM100A1 - IAN 413627

Silvercrest SCNM100A1 - IAN 413627 User Manual - German - 64 pages

Silvercrest SCNM100A1 - IAN 413627 User Manual - Dutch - 64 pages

Silvercrest SCNM100A1 - IAN 413627 User Manual - French - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SCNM100A1 - IAN 413627 Manual

Product: