Manual Silvercrest SCNM100A1 - IAN 413627 (page 44 of 64) (English)

806099

Zoom out

Zoom in

1/64

Sewing applications

vSewing a buttonhole on non-stretch fab-

rics:

1. Mark the positions of the buttonhole on the fabric.

2. Pull the button holder plate to the back, and place the

button in it. Push back the button holder plate against the

button to hold it tight.

Attach the buttonhole foot to the sewing machine.

NOTE

Pull the thread through the hole in the presser foot so that it is

under the presser foot.

3. Place the fabric under the presser foot so that the center

mark ① on the presser foot is aligned with the drawn

buttonhole line. Select the buttonhole stitch. Adjust the stitch

width and the stitch length to the desired width and density.

4. Pull down the buttonhole lever ① to the very bottom.

NOTE

It must be behind the holder ② on the buttonhole foot.

5. Slightly hold the end of the upper thread and start sewing.

Hold both threads tightly.

NOTE

Gently feed the fabric by hand. Before stopping, the sewing

machine will automatically sew a reinforcement stitch after the

buttonhole is sewn.

NOTE

The maximum buttonhole length is 3 cm. (Total of diameter +

thickness of button). The size of the buttonhole is determined by

the button inserted in the button holder plate.

6. Raise the presser foot and cut the thread.

NOTE

To sew over the same buttonhole again, raise the presser foot. (It

returns to the starting position.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SCNM100A1 - IAN 413627 in the language / languages: English as an attachment in your email.

The manual is 6.88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SCNM100A1 - IAN 413627

Silvercrest SCNM100A1 - IAN 413627 User Manual - German - 64 pages

Silvercrest SCNM100A1 - IAN 413627 User Manual - Dutch - 64 pages

Silvercrest SCNM100A1 - IAN 413627 User Manual - French - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SCNM100A1 - IAN 413627 Manual

Product: