669482

Silvercrest SBF 75 - IAN 290987 Manual

15
Zoom out
Zoom in
Previous page
1/76
Next page
16 GB/IE/NI
Disposal / Warranty / Service / Declaration of ConformityTroubleshooting / Cleaning and Care / Disposal
= Assign the unknown value in the app or reas-
sign user.
= The LC-display
1
is scrolling „- - - -“.
= The fat percentage is outside the measurable
range (less than 3 % or higher than 65 %).
= Repeat the measurement barefoot, if neces-
sary dampen the bottoms of your feet.
= The LC-display
1
reads „Err“.
= The maximum load capacity of
180 kg / 396lb / 28 st has been exceeded.
= Do not exceed 180 kg/396lb/28 st.
= „Err“ or incorrect weight appears.
= The surface is not level or firm.
= Place the scales on a level, firm surface.
= You are not standing still.
= Stand as still as possible.
= The incorrect weight appears.
= The zero point of the scales is incorrect.
= Wait for the diagnostic scales to shut off auto-
matically. Activate the diagnostic scales, wait
for „0.0 kg“ to appear, then repeat the meas-
urement.
= No Bluetooth
®
connection (
16
does not
appear).
= Device out of range.
= The open area minimum range is approx. 10 m.
Walls and ceiling reduce this range. Other
radio waves can interfere with transmission.
Therefore do not place the diagnostic scales
near devices such as WiFi router, microwave,
induction hobs.
= No Bluetooth
®
connection (no symbol).
= Not connected to the app.
= Completely close the app (including in the
background).
Restart Bluetooth
®
.
Restart the smartphone.
Briefly remove and reinsert the batteries in the
scales.
= The LC-display
1
reads „Full“.
= The user memory is full. No additional
measurements will be saved.
= Open the app within Bluetooth
®
range.
The data will automatically be transferred. This
may take up to a minute.
= The LC-display
1
reads „Lo“.
= The batteries in the diagnostic scales are
dead.
= Replace the batteries.
Cleaning and Care
Do not clean with chemical cleaners or scour-
ing agents.
Clean the product with a damp cloth. For more
stubborn dirt you may also apply a weak soap
solution to the cloth.
Never immerse the product in water or other
liquids. The devices may otherwise be damaged.
Ensure water does not enter the product. If this
does occur, wait for the devices to dry com-
pletely before using it again.
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBF 75 - IAN 290987 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBF 75 - IAN 290987 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info