Manual Silvercrest SBB 850 C1 - IAN 270356 (page 39 of 48) (English, German)

646206

Zoom out

Zoom in

1/48

SBB 850 C1

Ending a programme

When the baking process has been completed,

you will hear ten beeps and the display  indicates

0:00. At the end of the programme, the appliance

automatically changes to a keep-warm mode for

up to 60 minutes.

NOTE

►

This does not apply to programmes 6, 7 and 11.

In this mode, warm air circulates inside the appli-

ance. The keep-warm function can be ended early

by keeping the Start/Stop button  pressed until

a beep is heard.

DANGER! ELECTRIC SHOCK!

►

Before opening the appliance lid 2, discon-

nect the power plug from the socket. The

appliance should always be disconnected

from the power grid when not in use!

Taking out the bread

Always use pot holders or oven gloves when re-

moving the hot baking mould 7. Hold the baking

mould 7 tilted over a grill tray and shake it lightly

until the bread slides out of the baking mould 7.

If the bread does not slip oﬀ the kneading blades 6,

carefully remove the kneading blades 6 using the

supplied kneading blade remover 0.

NOTE

Do not use any metal objects that could cause

scratches on the non-stick coating. Rinse the

baking mould 7 with warm water directly after

removing the bread. This will help prevent the

kneading blades 6 becoming stuck on the drive

shafts.

TIP

If you remove the kneading hooks 6 from the

dough after the last kneading process, the bread

will not be torn open when removing it from the

baking mould 7.

■ Press the Start/Stop button  brieﬂ y to pause

the programme at the very start of the baking

phase or, pull the power plug out of the socket.

Ensure that you replace the power plug within

10 minutes so that the baking process can be

continued.

■ Open the appliance lid 2 and remove the

baking mould 7. With ﬂ oured hands, you can

remove the dough and then pull out the knead-

ing hooks 6.

■ Replace the dough in the back baking mould 7.

Replace the baking mould 7 and close the

appliance lid 2.

■ Put the power plug into the socket if necessary.

The baking program continues from where it

was stopped.

Allow the bread to cool for 15–30 minutes before

eating it.

Before cutting the bread, always check to ensure

that the kneading blades 6 have been removed

from it.

Error messages

■ If the display  shows "HHH" after the pro-

gramme has been started, it indicates that the

temperature in the bread maker is still too high.

Stop the programme and remove the power

plug. Open the appliance lid 2 and allow the

machine to cool down for 20 minutes before

reusing it.

■ If a new programme cannot be started directly

after the bread maker has completed a baking

process, it means the appliance is still too hot.

In this case, the display panel reverts to the

default setting (programme 1). Open the ap-

pliance lid 2 and allow the machine to cool

down for 20 minutes before reusing it.

NOTE

► Do not attempt to reuse the appliance until it

has cooled itself down. This functions only in

programme 12.

IB_270356_SBB850C1_LB1.indb 36 24.08.15 14:26

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBB 850 C1 - IAN 270356 in the language / languages: English, German as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SBB 850 C1 - IAN 270356

Silvercrest SBB 850 C1 - IAN 270356 Manual - English, German, Dutch - 50 pages

Silvercrest SBB 850 C1 - IAN 270356 User Manual - Dutch - 90 pages

Silvercrest SBB 850 C1 - IAN 270356 Manual - French - 50 pages

Silvercrest SBB 850 C1 - IAN 270356 User Manual - French - 66 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info